Our complete sets consist of components that are perfectly matched to each other, both in terms of sound and performance, to create a harmonious sound image.

The components were put together in such a way that the amplifiers produce the maximum possible performance with the selected loudspeakers.

The set includes everything you need for complete and safe cabling!

If you do not need individual components, or want to exchange them for others, write us briefly, we will then immediately change the offer according to your wishes.

The set includes the following components:

  • 1x DD Audio DM2500A 1-channel amplifier
  • 1x HERTZ Mille Power ML Power 4 4-channel amplifier
  • 2x Scanspeak Discovery 5F full range driver
  • 2x DD Audio VO-MN6.5 bass-midrange driver
  • 1x SP Audio SP-12CX 30cm Subwoofer
  • 1x Masori 50mm² OFC cable reel (free of charge)
  • 1x Masori 12" bass reflex cabinet 50L (free of charge)
  • 1x Masori fuse holder + 200A ANL fuse (free of charge)
  • 1x Masori 20m 2,5mm² OFC speaker cable (free of charge)
  • 1x Masori 5m 4mm² OFC speaker cable (free of charge)

What you could optionally

use in addition:
  1. RCA cable. Do you have an aftermarket radio or a factory radio? If you have an aftermarket radio you need the right amount of RCA cables, which you can find under our accessories. You need 1 cable per channel. If you have a factory radio, connect the original speaker wires to the high inputs of the power amp, or use a separate Hi-Low converter.
  2. Attenuation. With the increased music power, trim parts can suddenly start to vibrate. For this purpose you can cover them from the inside with Alubutyl, this is also recommended for the inside of the vehicle sheet metal, with which you can create an even clearer sound reproduction, without disturbing noises.
  3. Additional battery. Depending on the existing vehicle battery, it is useful from about 600W total power of the amplifier, to install an additional battery. You can find this under our accessories -> batteries. For which amplifier power, the respective battery is useful, is noted in the title of the batteries.
  4. Capacitor (PowerCap). A capacitor compensates for the voltage drops that can occur in the vehicle electrical system during strong bass hits. This is noticeable by an unclean bass reproduction, or slightly dimming lights in the interior. Here a powercap, or also an additional battery creates remedy.

Key Features DD Audio DM2500A 1-channel amplifier:

  • 1-channel mono amplifier in compact design
  • 1Ohm stable
  • Dimensions: 500 x 175 x 55 mm
  • Power @ 4Ω 14,4v 0,1% THD: 810 Watt
  • Power @ 2Ω 14,4v 0,1% THD: 1400 Watt
  • Power @ 1Ω 14,4v 0,1% THD: 2500 Watt

Key Features HERTZ Mille Power ML Power 4 4-Channel Amplifier:

  • 4-channel Class-D amplifier of the Hertz Mille Power series.
  • Impedance Minimal 1 Ohm
  • Power: 4x 150 W into 4 Ohm
  • Power: 4x 250 W into 2 Ohm
  • Power: 2x 150 W at 4 Ohm + 1x 500 W at 4 Ohm
  • Power: 2x 250 W at 2 Ohm + 1x 500 W at 4 Ohm
  • Power: 2x 500 W at 4 Ohm
  • Dimensions: 289 x 170 x 46.7 mm (length x width x height)
  • Weight: 2,45 kg

Key Features Scanspeak Discovery 5F full range driver:

  • 2.75" (7cm) midrange driver with paper cone
  • Powerful neodymium drive, balanced drive
  • 1" voice coil, titanium voice coil former
  • Power handling (nominal/music) = 10/20 W
  • frequency range = 90-20000 Hz
  • resonance frequency fs = 93 Hz
  • Impedance R = 8 Ohm

Key Features DD Audio VO-MN6.5 bass-midrange driver:

  • 16,5cm (6,5") bass-midrange driver
  • Impedance - 4 Ohm
  • Power (RMS) - 60 Watts
  • Power Maximum - 300 Watts Peak
  • Resonant Frequency - 106Hz
  • Sensitivity - 95.5 dB
  • Equivalent Volume Vas: 7.4l
  • Frequency Range - 100Hz-8KHz
  • Mounting Diameter: 143mm
  • Outer Diameter: 165mm
  • Mounting depth: 70mm

Key Features SP Audio SP-12CX 30cm Subwoofer:

  • 30cm (12") subwoofer
  • Impedance: 2+2 Ohms
  • Power RMS 2500W
  • Power MAX 5000W
  • Efficiency: 87,5 dB
  • Applicable frequency range: 30-200Hz
  • Voice coil diameter: 65,5mm
  • Suspension: PC + Spider Nomex 2 layers 2,5"
  • magnet: Ferrite 86x3 Oz Y30

Key Features Masori 12" bass reflex cabinet 50L:

  • Material MDF 18mm
  • cabinet volume 50L
  • Speaker size 30cm / 12 inch
  • Max. Installation depth 230mm
  • Hole diameter 282mm
  • Max. Subwoofer outer diameter 320mm
  • Dimensions 505 x 410 x 385mm, Bass Tunnel 100mm/200mm
  • Fabric colour Black melange

Key Features Masori 50mm² cable reel:

  • Material: OFC (100% Oxygen Free Copper!)
  • Power cable reel
  • 15m long
  • Color: Red or black
  • 50mm² cross section
  • 50mm² are approved for 270A
  • For amplifier power up to 3900Watt RMS!

Key Features Masori ANL fuse holder:

  • 1x up to 20-50mm² input
  • 1x up to 20-50mm² output
  • 1x incl. 200A ANL fuse
Rated 5/5 based on 28 customer reviews
Benedikt Golla - by , Feb 07, 2021

SPL-PRO complete set DD Audio, HERTZ, Scanspeak, SP Audio

Masori SPL-PRO Komplettset DD Audio, HERTZ, Scanspeak, SP Audio SPL-Pro
Masori SPL-PRO Komplettset DD Audio, HERTZ, Scanspeak, SP Audio SPL-Pro
Masori SPL-PRO Komplettset DD Audio, HERTZ, Scanspeak, SP Audio SPL-Pro
Masori SPL-PRO Komplettset DD Audio, HERTZ, Scanspeak, SP Audio SPL-Pro
Masori SPL-PRO Komplettset DD Audio, HERTZ, Scanspeak, SP Audio SPL-Pro
Masori SPL-PRO Komplettset DD Audio, HERTZ, Scanspeak, SP Audio SPL-Pro
Masori SPL-PRO Komplettset DD Audio, HERTZ, Scanspeak, SP Audio SPL-Pro
Masori SPL-PRO Komplettset DD Audio, HERTZ, Scanspeak, SP Audio SPL-Pro
Masori SPL-PRO Komplettset DD Audio, HERTZ, Scanspeak, SP Audio SPL-Pro
Masori SPL-PRO Komplettset DD Audio, HERTZ, Scanspeak, SP Audio SPL-Pro

SPL-PRO complete set DD Audio, HERTZ, Scanspeak, SP Audio

🚀 ANGEBOT

Masori

Regular price €2.375,25 €2.043,97 SPARE €331,28

inkl. MwSt., zzgl. Versand

Our complete sets consist of components that are perfectly matched to each other, both in terms of sound and performance, to create a harmonious sound image.

The components were put together in such a way that the amplifiers produce the maximum possible performance with the selected loudspeakers.

The set includes everything you need for complete and safe cabling!

If you do not need individual components, or want to exchange them for others, write us briefly, we will then immediately change the offer according to your wishes.

The set includes the following components:

  • 1x DD Audio DM2500A 1-channel amplifier
  • 1x HERTZ Mille Power ML Power 4 4-channel amplifier
  • 2x Scanspeak Discovery 5F full range driver
  • 2x DD Audio VO-MN6.5 bass-midrange driver
  • 1x SP Audio SP-12CX 30cm Subwoofer
  • 1x Masori 50mm² OFC cable reel (free of charge)
  • 1x Masori 12" bass reflex cabinet 50L (free of charge)
  • 1x Masori fuse holder + 200A ANL fuse (free of charge)
  • 1x Masori 20m 2,5mm² OFC speaker cable (free of charge)
  • 1x Masori 5m 4mm² OFC speaker cable (free of charge)

What you could optionally

use in addition:
  1. RCA cable. Do you have an aftermarket radio or a factory radio? If you have an aftermarket radio you need the right amount of RCA cables, which you can find under our accessories. You need 1 cable per channel. If you have a factory radio, connect the original speaker wires to the high inputs of the power amp, or use a separate Hi-Low converter.
  2. Attenuation. With the increased music power, trim parts can suddenly start to vibrate. For this purpose you can cover them from the inside with Alubutyl, this is also recommended for the inside of the vehicle sheet metal, with which you can create an even clearer sound reproduction, without disturbing noises.
  3. Additional battery. Depending on the existing vehicle battery, it is useful from about 600W total power of the amplifier, to install an additional battery. You can find this under our accessories -> batteries. For which amplifier power, the respective battery is useful, is noted in the title of the batteries.
  4. Capacitor (PowerCap). A capacitor compensates for the voltage drops that can occur in the vehicle electrical system during strong bass hits. This is noticeable by an unclean bass reproduction, or slightly dimming lights in the interior. Here a powercap, or also an additional battery creates remedy.

Key Features DD Audio DM2500A 1-channel amplifier:

  • 1-channel mono amplifier in compact design
  • 1Ohm stable
  • Dimensions: 500 x 175 x 55 mm
  • Power @ 4Ω 14,4v 0,1% THD: 810 Watt
  • Power @ 2Ω 14,4v 0,1% THD: 1400 Watt
  • Power @ 1Ω 14,4v 0,1% THD: 2500 Watt

Key Features HERTZ Mille Power ML Power 4 4-Channel Amplifier:

  • 4-channel Class-D amplifier of the Hertz Mille Power series.
  • Impedance Minimal 1 Ohm
  • Power: 4x 150 W into 4 Ohm
  • Power: 4x 250 W into 2 Ohm
  • Power: 2x 150 W at 4 Ohm + 1x 500 W at 4 Ohm
  • Power: 2x 250 W at 2 Ohm + 1x 500 W at 4 Ohm
  • Power: 2x 500 W at 4 Ohm
  • Dimensions: 289 x 170 x 46.7 mm (length x width x height)
  • Weight: 2,45 kg

Key Features Scanspeak Discovery 5F full range driver:

  • 2.75" (7cm) midrange driver with paper cone
  • Powerful neodymium drive, balanced drive
  • 1" voice coil, titanium voice coil former
  • Power handling (nominal/music) = 10/20 W
  • frequency range = 90-20000 Hz
  • resonance frequency fs = 93 Hz
  • Impedance R = 8 Ohm

Key Features DD Audio VO-MN6.5 bass-midrange driver:

  • 16,5cm (6,5") bass-midrange driver
  • Impedance - 4 Ohm
  • Power (RMS) - 60 Watts
  • Power Maximum - 300 Watts Peak
  • Resonant Frequency - 106Hz
  • Sensitivity - 95.5 dB
  • Equivalent Volume Vas: 7.4l
  • Frequency Range - 100Hz-8KHz
  • Mounting Diameter: 143mm
  • Outer Diameter: 165mm
  • Mounting depth: 70mm

Key Features SP Audio SP-12CX 30cm Subwoofer:

  • 30cm (12") subwoofer
  • Impedance: 2+2 Ohms
  • Power RMS 2500W
  • Power MAX 5000W
  • Efficiency: 87,5 dB
  • Applicable frequency range: 30-200Hz
  • Voice coil diameter: 65,5mm
  • Suspension: PC + Spider Nomex 2 layers 2,5"
  • magnet: Ferrite 86x3 Oz Y30

Key Features Masori 12" bass reflex cabinet 50L:

  • Material MDF 18mm
  • cabinet volume 50L
  • Speaker size 30cm / 12 inch
  • Max. Installation depth 230mm
  • Hole diameter 282mm
  • Max. Subwoofer outer diameter 320mm
  • Dimensions 505 x 410 x 385mm, Bass Tunnel 100mm/200mm
  • Fabric colour Black melange

Key Features Masori 50mm² cable reel:

  • Material: OFC (100% Oxygen Free Copper!)
  • Power cable reel
  • 15m long
  • Color: Red or black
  • 50mm² cross section
  • 50mm² are approved for 270A
  • For amplifier power up to 3900Watt RMS!

Key Features Masori ANL fuse holder:

  • 1x up to 20-50mm² input
  • 1x up to 20-50mm² output
  • 1x incl. 200A ANL fuse

€2.375,25 €2.043,97 SPARE €331,28

inkl. MwSt., zzgl. Versand

1 set
Delivery time: 5-10 days