Our complete sets consist of perfectly matched components that fit together perfectly in terms of both sound and performance to create a harmonious sound image.
The components were put together so that the amplifiers produce the maximum possible performance with the selected speakers.

The set includes everything you need for complete and safe cabling!
If you do not need individual components, or want to exchange them for others, write us briefly, we will then change the offer immediately according to your wishes.
The set includes the following components:
  • 1x DD Audio M3C 1-channel amplifier
  • 1x DD Audio SS4B 4-channel amplifier
  • 2x HERTZ Mille Legend ML280.3 tweeter
  • 2x Cerwin Vega Stroker Pro CVMPCL6.5 bass-midrange driver
  • 1x Cerwin Vega Stroker Pro SPCL182 46cm subwoofer
  • 1x Masori 50mm² OFC cable reel (free of charge)
  • 1x Masori fuse holder + 200A ANL fuse (free of charge)
  • 1x Masori 20m 2,5mm² OFC speaker cable (free of charge)
  • 1x Masori 5m 4mm² OFC speaker cable (free of charge)
What you could optionally
use in addition:
  1. RCA cable. Do you have an aftermarket radio or a factory radio? If you have an aftermarket radio you need the right amount of RCA cables, which you can find under our accessories. You need 1 cable per channel. If you have a factory radio, connect the original speaker wires to the high inputs of the power amp, or use a separate Hi-Low converter.
  2. Attenuation. With the increased music power, trim parts can suddenly start to vibrate. For this purpose you can cover them from the inside with Alubutyl, this is also recommended for the inside of the vehicle sheet metal, with which you can create an even clearer sound reproduction, without disturbing noises.
  3. Additional battery. Depending on the existing vehicle battery, it is useful from about 600W total power of the amplifier, to install an additional battery. You can find this under our accessories -> batteries. For which amplifier power, the respective battery is useful, is noted in the title of the batteries.
  4. Capacitor (PowerCap). A capacitor compensates for the voltage drops that can occur in the vehicle electrical system during strong bass hits. This is noticeable by an unclean bass reproduction, or slightly dimming lights in the interior. Here, a power cap or an additional battery provides a remedy.
  5. Subwoofer enclosure: We also offer individual subwoofer enclosures, according to your specifications. Just send us an email with your maximum dimensions/imagination (preferably with a hand sketch) and we will calculate and build you a ready-made custom enclosure.

Key Features DD Audio M3C 1-Channel Amplifier:

  • 1-channel mono amplifier in compact design
  • 1 Ohm stable
  • Dimensions: 500 x 230 x 65 mm
  • Power @ 4Ω 14,4v 0,1% THD: 1800 Watt
  • Power @ 2Ω 14,4v 0,1% THD: 2400 Watt
  • Power @ 1Ω 14,4v 0,1% THD: 3800 Watt

Key Features DD Audio SS4B 4-Channel Amplifier:

  • 4-channel amplifier
  • Stereo 2 ohm / bridged 4 ohm stable.
  • Dimensions: 300x175x54.5 mm
  • Power @ 4Ω 14,4v 1% THD: 4 x 250 W
  • Power @ 2Ω 14,4v 1% THD: 4 x 350 W
  • Power @ 4Ω Bridge 14,4v 1% THD: 2 x 700 W

Key Features HERTZ Mille Legend ML280.3 Tweeter:

  • 28mm tweeter of the HERTZ Mille LEGEND series.
  • voice coil diameter: 28mm
  • power handling: 180 Watt max (at HP 1,8kHz/12dB)
  • impedance: 4Ohm
  • frequency response: 1kHz - 28khz
  • Efficiency: 92db/spl
  • Dimensions:
    • Outer diameter: 53.4mm
    • mounting diameter: 48mm
    • mounting depth: 13,5mm
    • Depth complete: 29mm

      Key Features Cerwin Vega Stroker Pro CVMPCL6.5 bass-midrange driver:

      • 16.5cm (6.5″) Stroker Pro Mobile Series bass-midrange driver.
      • Power output: 200 watts max
      • RMS power 100 watts
      • IPX65 rated speakers
      • Built for use in all weather conditions
      • 1.75″ Single layer voice coil with black coated coil former
      • Mounting depth: 7.5cm
      • Impedance: 4 ohms
      • Frequency response: 80-16,000Hz
      • Sensitivity: 93.2dB

                Key Features Cerwin Vega Stroker Pro SPCL182 46cm Subwoofer:

                • 46cm (18") Stroker Pro Subwoofer of the Classic Series
                • Power: 1600W RMS
                • Power: 3200W Max
                • Recommended power: 1800W
                • 4" (100mm) voice coil with coated VC former.
                • Impedance: 2Ω
                • Overall diameter: 460mm
                • Mounting diameter: 420,5mm
                • Screw hole diameter: 7mm
                • Mounting depth: 239mm

                      Key Features Masori 50mm² Cable Reel:

                      • Material: OFC (100% Oxygen Free Copper!)
                      • Power cable reel
                      • 15m long
                      • Color: Red or black
                      • 50mm² cross section
                      • 50mm² are approved for 270A
                      • For amplifier power up to 3900Watt RMS!

                      Key Features Masori ANL fuse holder:

                      • 1x up to 20-50mm² input
                      • 1x up to 20-50mm² output
                      • 1x incl. 200A ANL fuse
                                  Rated 5/5 based on 28 customer reviews
                                  Benedikt Golla - by , Feb 07, 2021

                                  SPL-PRO complete set Cerwin Vega, DD Audio, HERTZ

                                  Masori SPL-PRO Komplettset Cerwin Vega, DD Audio, HERTZ SPL-Pro
                                  Masori SPL-PRO Komplettset Cerwin Vega, DD Audio, HERTZ SPL-Pro
                                  Masori SPL-PRO Komplettset Cerwin Vega, DD Audio, HERTZ SPL-Pro
                                  Masori SPL-PRO Komplettset Cerwin Vega, DD Audio, HERTZ SPL-Pro
                                  Masori SPL-PRO Komplettset Cerwin Vega, DD Audio, HERTZ SPL-Pro
                                  Masori SPL-PRO Komplettset Cerwin Vega, DD Audio, HERTZ SPL-Pro
                                  Masori SPL-PRO Komplettset Cerwin Vega, DD Audio, HERTZ SPL-Pro
                                  Masori SPL-PRO Komplettset Cerwin Vega, DD Audio, HERTZ SPL-Pro
                                  Masori SPL-PRO Komplettset Cerwin Vega, DD Audio, HERTZ SPL-Pro

                                  SPL-PRO complete set Cerwin Vega, DD Audio, HERTZ

                                  Masori

                                  Regular price €3.749,34 €3.517,96 SPARE €231,38

                                  inkl. MwSt., zzgl. Versand

                                  Our complete sets consist of perfectly matched components that fit together perfectly in terms of both sound and performance to create a harmonious sound image.
                                  The components were put together so that the amplifiers produce the maximum possible performance with the selected speakers.

                                  The set includes everything you need for complete and safe cabling!
                                  If you do not need individual components, or want to exchange them for others, write us briefly, we will then change the offer immediately according to your wishes.
                                  The set includes the following components:
                                  • 1x DD Audio M3C 1-channel amplifier
                                  • 1x DD Audio SS4B 4-channel amplifier
                                  • 2x HERTZ Mille Legend ML280.3 tweeter
                                  • 2x Cerwin Vega Stroker Pro CVMPCL6.5 bass-midrange driver
                                  • 1x Cerwin Vega Stroker Pro SPCL182 46cm subwoofer
                                  • 1x Masori 50mm² OFC cable reel (free of charge)
                                  • 1x Masori fuse holder + 200A ANL fuse (free of charge)
                                  • 1x Masori 20m 2,5mm² OFC speaker cable (free of charge)
                                  • 1x Masori 5m 4mm² OFC speaker cable (free of charge)
                                  What you could optionally
                                  use in addition:
                                  1. RCA cable. Do you have an aftermarket radio or a factory radio? If you have an aftermarket radio you need the right amount of RCA cables, which you can find under our accessories. You need 1 cable per channel. If you have a factory radio, connect the original speaker wires to the high inputs of the power amp, or use a separate Hi-Low converter.
                                  2. Attenuation. With the increased music power, trim parts can suddenly start to vibrate. For this purpose you can cover them from the inside with Alubutyl, this is also recommended for the inside of the vehicle sheet metal, with which you can create an even clearer sound reproduction, without disturbing noises.
                                  3. Additional battery. Depending on the existing vehicle battery, it is useful from about 600W total power of the amplifier, to install an additional battery. You can find this under our accessories -> batteries. For which amplifier power, the respective battery is useful, is noted in the title of the batteries.
                                  4. Capacitor (PowerCap). A capacitor compensates for the voltage drops that can occur in the vehicle electrical system during strong bass hits. This is noticeable by an unclean bass reproduction, or slightly dimming lights in the interior. Here, a power cap or an additional battery provides a remedy.
                                  5. Subwoofer enclosure: We also offer individual subwoofer enclosures, according to your specifications. Just send us an email with your maximum dimensions/imagination (preferably with a hand sketch) and we will calculate and build you a ready-made custom enclosure.

                                  Key Features DD Audio M3C 1-Channel Amplifier:

                                  • 1-channel mono amplifier in compact design
                                  • 1 Ohm stable
                                  • Dimensions: 500 x 230 x 65 mm
                                  • Power @ 4Ω 14,4v 0,1% THD: 1800 Watt
                                  • Power @ 2Ω 14,4v 0,1% THD: 2400 Watt
                                  • Power @ 1Ω 14,4v 0,1% THD: 3800 Watt

                                  Key Features DD Audio SS4B 4-Channel Amplifier:

                                  • 4-channel amplifier
                                  • Stereo 2 ohm / bridged 4 ohm stable.
                                  • Dimensions: 300x175x54.5 mm
                                  • Power @ 4Ω 14,4v 1% THD: 4 x 250 W
                                  • Power @ 2Ω 14,4v 1% THD: 4 x 350 W
                                  • Power @ 4Ω Bridge 14,4v 1% THD: 2 x 700 W

                                  Key Features HERTZ Mille Legend ML280.3 Tweeter:

                                  • 28mm tweeter of the HERTZ Mille LEGEND series.
                                  • voice coil diameter: 28mm
                                  • power handling: 180 Watt max (at HP 1,8kHz/12dB)
                                  • impedance: 4Ohm
                                  • frequency response: 1kHz - 28khz
                                  • Efficiency: 92db/spl
                                  • Dimensions:
                                    • Outer diameter: 53.4mm
                                    • mounting diameter: 48mm
                                    • mounting depth: 13,5mm
                                    • Depth complete: 29mm

                                      Key Features Cerwin Vega Stroker Pro CVMPCL6.5 bass-midrange driver:

                                      • 16.5cm (6.5″) Stroker Pro Mobile Series bass-midrange driver.
                                      • Power output: 200 watts max
                                      • RMS power 100 watts
                                      • IPX65 rated speakers
                                      • Built for use in all weather conditions
                                      • 1.75″ Single layer voice coil with black coated coil former
                                      • Mounting depth: 7.5cm
                                      • Impedance: 4 ohms
                                      • Frequency response: 80-16,000Hz
                                      • Sensitivity: 93.2dB

                                                Key Features Cerwin Vega Stroker Pro SPCL182 46cm Subwoofer:

                                                • 46cm (18") Stroker Pro Subwoofer of the Classic Series
                                                • Power: 1600W RMS
                                                • Power: 3200W Max
                                                • Recommended power: 1800W
                                                • 4" (100mm) voice coil with coated VC former.
                                                • Impedance: 2Ω
                                                • Overall diameter: 460mm
                                                • Mounting diameter: 420,5mm
                                                • Screw hole diameter: 7mm
                                                • Mounting depth: 239mm

                                                      Key Features Masori 50mm² Cable Reel:

                                                      • Material: OFC (100% Oxygen Free Copper!)
                                                      • Power cable reel
                                                      • 15m long
                                                      • Color: Red or black
                                                      • 50mm² cross section
                                                      • 50mm² are approved for 270A
                                                      • For amplifier power up to 3900Watt RMS!

                                                      Key Features Masori ANL fuse holder:

                                                      • 1x up to 20-50mm² input
                                                      • 1x up to 20-50mm² output
                                                      • 1x incl. 200A ANL fuse

                                                                  €3.749,34 €3.517,96 SPARE €231,38

                                                                  inkl. MwSt., zzgl. Versand

                                                                  1 set
                                                                  Delivery time: 5-10 days