Our complete sets consist of perfectly matched components that fit together perfectly in terms of both sound and performance to create a harmonious sound image.
The components were put together so that the amplifiers produce the maximum possible performance with the selected speakers.

The set includes everything you need for complete and safe cabling!
If you do not need individual components, or want to exchange them for others, write us briefly, we will then change the offer immediately according to your wishes.
The set includes the following components:
  • 1x DD Audio DM1500A 1-channel amplifier
  • 1x DD Audio SS4B 4-channel amplifier
  • 2x HERTZ Mille Pro MP25.3 tweeter
  • 2x DD Audio VO-MN6.5 bass-midrange driver
  • 1x DD Audio Redline 818D 46cm subwoofer
  • 1x Masori 50mm² OFC cable reel (free of charge)
  • 1x Masori fuse holder + 200A ANL fuse (free of charge)
  • 1x Masori 20m 2,5mm² OFC speaker cable (free of charge)
  • 1x Masori 5m 4mm² OFC speaker cable (free of charge)
What you could optionally
use in addition:
  1. RCA cable. Do you have an aftermarket radio or a factory radio? If you have an aftermarket radio you need the right amount of RCA cables, which you can find under our accessories. You need 1 cable per channel. If you have a factory radio, connect the original speaker wires to the high inputs of the power amp, or use a separate Hi-Low converter.
  2. Attenuation. With the increased music power, trim parts can suddenly start to vibrate. For this purpose you can cover them from the inside with Alubutyl, this is also recommended for the inside of the vehicle sheet metal, with which you can create an even clearer sound reproduction, without disturbing noises.
  3. Additional battery. Depending on the existing vehicle battery, it is useful from about 600W total power of the amplifier, to install an additional battery. You can find this under our accessories -> batteries. For which amplifier power, the respective battery is useful, is noted in the title of the batteries.
  4. Capacitor (PowerCap). A capacitor compensates for the voltage drops that can occur in the vehicle electrical system during strong bass hits. This is noticeable by an unclean bass reproduction, or slightly dimming lights in the interior. Here, a power cap or an additional battery provides a remedy.
  5. Rear system. The speakers in the rear doors of your car do not have the same power as the front system. Generally it is sufficient to replace only the front system. However, if you want a homogeneous sound from all speakers, we will be happy to create an individual complete set for you.
  6. Subwoofer enclosures: We also offer individual subwoofer enclosures according to your specifications. Just send us an email with your maximum dimensions/idea (preferably with a hand sketch) and we will calculate and build you a ready-made custom cabinet.

Key Features DD AudioDM1500A 1-channel amplifier:

  • 1-channel mono amplifier in mini design
  • 1Ohm stable
  • Dimensions: 350 x 175 x 55 mm
  • Power @ 4Ω 14,4v 0,1% THD: 580 Watt
  • Power @ 2Ω 14,4v 0,1% THD: 1000 Watt
  • Power @ 1Ω 14,4v 0,1% THD: 1500 Watt

Key Features DD Audio SS4B 4-Channel Amplifier:

  • 4-channel amplifier
  • Stereo 2 ohm / bridged 4 ohm stable.
  • Dimensions: 300x175x54.5 mm
  • Power @ 4Ω 14,4v 1% THD: 4 x 250 W
  • Power @ 2Ω 14,4v 1% THD: 4 x 350 W
  • Power @ 4Ω Bridge 14,4v 1% THD: 2 x 700 W

Key Features HERTZ Mille Pro MP25.3 Tweeter:

  • 25mm tweeter of the HERTZ MILLE PRO series.
  • voice coil diameter: 25mm
  • Power handling: 120 Watt max (at HP 2,5kHz/12dB)
  • impedance: 4Ohm
  • frequency response: 1,4kHz - 22,5khz
  • Efficiency: 91db/spl
  • Dimensions:
    • Outer diameter: 44mm
    • mounting diameter: 41mm
    • mounting depth: 17mm
    • Depth complete: 27mm

    Key Features DD Audio VO-MN6.5 bass-midrange driver:

    • 16,5cm (6,5") bass-midrange driver
    • Impedance - 4 Ohm
    • Power (RMS) - 60 Watts
    • Power Maximum - 300 Watts Peak
    • Resonant Frequency - 106Hz
    • Sensitivity - 95.5 dB
    • Equivalent Volume Vas: 7.4l
    • Frequency Range - 100Hz-8KHz
    • Mounting Diameter: 143mm
    • Outer Diameter: 165mm
    • Mounting depth: 70mm

              Key Features DD Audio Redline 818D 46cm Subwoofer:

              • 46cm (18") subwoofer
              • Power handling (RMS) 2000 Watt
              • Peak power handling (Peak) 6000 Watt
              • Impedance Options: Double 2 Ohm
              • Playback Range 10Hz - 500Hz
              • Resonant Frequency (Fs) 34.32Hz

                Key Features Masori 50mm² Cable Reel:

                • Material: OFC (100% Oxygen Free Copper!)
                • Power cable reel
                • 15m long
                • Color: Red or black
                • 50mm² cross section
                • 50mm² are approved for 270A
                • For amplifier power up to 3900Watt RMS!

                Key Features Masori ANL fuse holder:

                • 1x up to 20-50mm² input
                • 1x up to 20-50mm² output
                • 1x incl. 200A ANL fuse
                            Rated 5/5 based on 28 customer reviews
                            Benedikt Golla - by , Feb 07, 2021

                            SPL-PRO Complete Set - 3 - DD Audio, HERTZ

                            Masori SPL-PRO Komplettset - 3 - DD Audio, HERTZ SPL-Pro
                            Masori SPL-PRO Komplettset - 3 - DD Audio, HERTZ SPL-Pro
                            Masori SPL-PRO Komplettset - 3 - DD Audio, HERTZ SPL-Pro
                            Masori SPL-PRO Komplettset - 3 - DD Audio, HERTZ SPL-Pro
                            Masori SPL-PRO Komplettset - 3 - DD Audio, HERTZ SPL-Pro
                            Masori SPL-PRO Komplettset - 3 - DD Audio, HERTZ SPL-Pro
                            Masori SPL-PRO Komplettset - 3 - DD Audio, HERTZ SPL-Pro
                            Masori SPL-PRO Komplettset - 3 - DD Audio, HERTZ SPL-Pro
                            Masori SPL-PRO Komplettset - 3 - DD Audio, HERTZ SPL-Pro

                            SPL-PRO Complete Set - 3 - DD Audio, HERTZ

                            Masori

                            Regular price €2.575,34 €2.343,96 SPARE €231,38

                            inkl. MwSt., zzgl. Versand

                            Our complete sets consist of perfectly matched components that fit together perfectly in terms of both sound and performance to create a harmonious sound image.
                            The components were put together so that the amplifiers produce the maximum possible performance with the selected speakers.

                            The set includes everything you need for complete and safe cabling!
                            If you do not need individual components, or want to exchange them for others, write us briefly, we will then change the offer immediately according to your wishes.
                            The set includes the following components:
                            • 1x DD Audio DM1500A 1-channel amplifier
                            • 1x DD Audio SS4B 4-channel amplifier
                            • 2x HERTZ Mille Pro MP25.3 tweeter
                            • 2x DD Audio VO-MN6.5 bass-midrange driver
                            • 1x DD Audio Redline 818D 46cm subwoofer
                            • 1x Masori 50mm² OFC cable reel (free of charge)
                            • 1x Masori fuse holder + 200A ANL fuse (free of charge)
                            • 1x Masori 20m 2,5mm² OFC speaker cable (free of charge)
                            • 1x Masori 5m 4mm² OFC speaker cable (free of charge)
                            What you could optionally
                            use in addition:
                            1. RCA cable. Do you have an aftermarket radio or a factory radio? If you have an aftermarket radio you need the right amount of RCA cables, which you can find under our accessories. You need 1 cable per channel. If you have a factory radio, connect the original speaker wires to the high inputs of the power amp, or use a separate Hi-Low converter.
                            2. Attenuation. With the increased music power, trim parts can suddenly start to vibrate. For this purpose you can cover them from the inside with Alubutyl, this is also recommended for the inside of the vehicle sheet metal, with which you can create an even clearer sound reproduction, without disturbing noises.
                            3. Additional battery. Depending on the existing vehicle battery, it is useful from about 600W total power of the amplifier, to install an additional battery. You can find this under our accessories -> batteries. For which amplifier power, the respective battery is useful, is noted in the title of the batteries.
                            4. Capacitor (PowerCap). A capacitor compensates for the voltage drops that can occur in the vehicle electrical system during strong bass hits. This is noticeable by an unclean bass reproduction, or slightly dimming lights in the interior. Here, a power cap or an additional battery provides a remedy.
                            5. Rear system. The speakers in the rear doors of your car do not have the same power as the front system. Generally it is sufficient to replace only the front system. However, if you want a homogeneous sound from all speakers, we will be happy to create an individual complete set for you.
                            6. Subwoofer enclosures: We also offer individual subwoofer enclosures according to your specifications. Just send us an email with your maximum dimensions/idea (preferably with a hand sketch) and we will calculate and build you a ready-made custom cabinet.

                            Key Features DD AudioDM1500A 1-channel amplifier:

                            • 1-channel mono amplifier in mini design
                            • 1Ohm stable
                            • Dimensions: 350 x 175 x 55 mm
                            • Power @ 4Ω 14,4v 0,1% THD: 580 Watt
                            • Power @ 2Ω 14,4v 0,1% THD: 1000 Watt
                            • Power @ 1Ω 14,4v 0,1% THD: 1500 Watt

                            Key Features DD Audio SS4B 4-Channel Amplifier:

                            • 4-channel amplifier
                            • Stereo 2 ohm / bridged 4 ohm stable.
                            • Dimensions: 300x175x54.5 mm
                            • Power @ 4Ω 14,4v 1% THD: 4 x 250 W
                            • Power @ 2Ω 14,4v 1% THD: 4 x 350 W
                            • Power @ 4Ω Bridge 14,4v 1% THD: 2 x 700 W

                            Key Features HERTZ Mille Pro MP25.3 Tweeter:

                            • 25mm tweeter of the HERTZ MILLE PRO series.
                            • voice coil diameter: 25mm
                            • Power handling: 120 Watt max (at HP 2,5kHz/12dB)
                            • impedance: 4Ohm
                            • frequency response: 1,4kHz - 22,5khz
                            • Efficiency: 91db/spl
                            • Dimensions:
                              • Outer diameter: 44mm
                              • mounting diameter: 41mm
                              • mounting depth: 17mm
                              • Depth complete: 27mm

                              Key Features DD Audio VO-MN6.5 bass-midrange driver:

                              • 16,5cm (6,5") bass-midrange driver
                              • Impedance - 4 Ohm
                              • Power (RMS) - 60 Watts
                              • Power Maximum - 300 Watts Peak
                              • Resonant Frequency - 106Hz
                              • Sensitivity - 95.5 dB
                              • Equivalent Volume Vas: 7.4l
                              • Frequency Range - 100Hz-8KHz
                              • Mounting Diameter: 143mm
                              • Outer Diameter: 165mm
                              • Mounting depth: 70mm

                                        Key Features DD Audio Redline 818D 46cm Subwoofer:

                                        • 46cm (18") subwoofer
                                        • Power handling (RMS) 2000 Watt
                                        • Peak power handling (Peak) 6000 Watt
                                        • Impedance Options: Double 2 Ohm
                                        • Playback Range 10Hz - 500Hz
                                        • Resonant Frequency (Fs) 34.32Hz

                                          Key Features Masori 50mm² Cable Reel:

                                          • Material: OFC (100% Oxygen Free Copper!)
                                          • Power cable reel
                                          • 15m long
                                          • Color: Red or black
                                          • 50mm² cross section
                                          • 50mm² are approved for 270A
                                          • For amplifier power up to 3900Watt RMS!

                                          Key Features Masori ANL fuse holder:

                                          • 1x up to 20-50mm² input
                                          • 1x up to 20-50mm² output
                                          • 1x incl. 200A ANL fuse

                                                      €2.575,34 €2.343,96 SPARE €231,38

                                                      inkl. MwSt., zzgl. Versand

                                                      1 set
                                                      Delivery time: 5-10 days