Our complete sets consist of perfectly matched components that fit together perfectly in terms of sound and performance to create a harmonious sound image.
The components were put together in such a way that the amplifiers produce the maximum possible performance with the selected speakers.

The set includes everything you need for complete and safe cabling!
If you do not need individual components, or want to exchange them for others, write us briefly, we will then change the offer immediately according to your wishes.
The set includes the following components:
  • 1x DD Audio D5.1000 5-channel amplifier
  • 2x DD Audio VO-B1a tweeter
  • 2x DD Audio VO-MN6.5 bass-midrange driver
  • 1x DD Audio LE-M12D 30cm cabinet subwoofer
  • 1x Stinger SK4241 25mm² cable set incl. fuse (free of charge)
  • 1x Masori 25m 2,5mm² speaker cable (free of charge)
What you could optionally
use in addition:
  1. RCA cable. Do you have an aftermarket radio or a factory radio? If you have an aftermarket radio you need the right amount of RCA cables, which you can find under our accessories. You need 1 cable per channel. If you have a factory radio, connect the original speaker wires to the high inputs of the power amp, or use a separate Hi-Low converter.
  2. Attenuation. With the increased music power, trim parts can suddenly start to vibrate. For this purpose you can cover them from the inside with Alubutyl, this is also recommended for the inside of the vehicle sheet metal, with which you can create an even clearer sound reproduction, without disturbing noises.
  3. Additional battery. Depending on the existing vehicle battery, it is useful from about 600W total power of the amplifier, to install an additional battery. You can find this under our accessories -> batteries. For which amplifier power, the respective battery is useful, is noted in the title of the batteries.
  4. Capacitor (PowerCap). A capacitor compensates for the voltage drops that can occur in the vehicle electrical system during strong bass hits. This is noticeable by an unclean bass reproduction, or slightly dimming lights in the interior. Here, a power cap or an additional battery provides a remedy.
  5. Rear system. The speakers in the rear doors of your car do not have the same power as the front system. Generally it is sufficient to replace only the front system. However, if you want a homogeneous sound from all speakers, we will be happy to create an individual complete set for you.
  6. Subwoofer enclosures: We also offer individual subwoofer enclosures according to your specifications. Just send us an email with your maximum dimensions/idea (preferably with a hand sketch) and we will calculate and build you a ready-made custom cabinet.

Key Features DD Audio D5.1000 5-channel amplifier:

  • 5-channel amplifier in compact design
  • 1Ohm stable
  • Dimensions: 450 x 175 x 55 mm
  • Power @ 4Ω 14,4v 0,1% THD: 4x90 + 1x680 Watt
  • Power @ 2Ω 14,4v 0,1% THD: 4x140 + 1x810 Watt
  • Power @ 1Ω 14,4v 0,1% THD: + 1x1000 Watt

Key Features DD Audio VO-B1a Tweeter:

  • VO-B1a Bullet Tweeter Series
  • Power: 50W RMS
  • Peak power: 100W
  • voice coil diameter: 1"
  • Impedance: 4 ohm
  • Frequency response (Hz): 3.5kHz - 20kHz
  • Efficiency in dBSPL: 104
  • Mounting diameter (MM): 59
  • Mounting depth (MM): 38

    Key Features DD Audio VO-MN6.5 bass-midrange driver:

    • 16.5cm (6.5") neodymium-driven woofer
    • Impedance - 4 Ohm
    • Power (RMS) - 60 Watts
    • Maximum output - 300 watts peak
    • Resonant Frequency - 106Hz
    • Sensitivity - 95.5 dB
    • Equivalent Volume Vas: 7.4l
    • Frequency Range - 100Hz-8KHz
    • Mounting depth: 70mm
    • Mounting diameter: 143mm
    • Outer Diameter: 165mm

              Key Features DD Audio LE-M12D 30cm cabinet subwoofer:

              • DD Redline Series Subwoofer
              • 12" (30cm) sandwich paper cone
              • D2 (2x2Ohm) impedance
              • Patented ferrite magnet system
              • Lossless linear suspension
              • Foam surround
              • Die cast aluminium basket
              • Tuning frequency: 40 Hz
              • Recommended amplifier power: 600 Watt RMS
              • Dimensions: 510 x 380 x 305 mm

                  Key Features Stinger SK4241 25mm² Cable Set:

                  • Cable set for a maximum amplifier power of 1500 watts (RMS) / 150A.
                  • Cable cross section: 25 mm² made of 100% copper!
                  • Scope of delivery:
                    • 5,5m Hyper-Twist 4GA 25mm² OFC power cable (matt red)
                    • 0,9m Hyper-Twist 4GA 25mm² OFC ground cable (matt-black)
                    • 5,18m 0,82mm² remote power cable (matt-blue)
                    • 60A Fuse
                    • Fuse holder SPD5101 AGU
                    • 25mm² crimp ring terminals, pre-installed
                    • 1.5mm² Piston Connector (blue)
                    • 25mm² Snap In Protective Fire Sleeve
                    • Mounting screws
                    • 10x cable ties (17,8cm / 7")
                                  Rated 5/5 based on 28 customer reviews
                                  Benedikt Golla - by , Feb 07, 2021

                                  SPL-PLUS complete set DD Audio

                                  Masori SPL-PLUS Komplettset DD Audio SPL-Plus
                                  Masori SPL-PLUS Komplettset DD Audio SPL-Plus
                                  Masori SPL-PLUS Komplettset DD Audio SPL-Plus
                                  Masori SPL-PLUS Komplettset DD Audio SPL-Plus
                                  Masori SPL-PLUS Komplettset DD Audio SPL-Plus
                                  Masori SPL-PLUS Komplettset DD Audio SPL-Plus
                                  Masori SPL-PLUS Komplettset DD Audio SPL-Plus

                                  SPL-PLUS complete set DD Audio

                                  Masori

                                  Regular price €1.474,85 €1.367,96 SPARE €106,89

                                  inkl. MwSt., zzgl. Versand

                                  Our complete sets consist of perfectly matched components that fit together perfectly in terms of sound and performance to create a harmonious sound image.
                                  The components were put together in such a way that the amplifiers produce the maximum possible performance with the selected speakers.

                                  The set includes everything you need for complete and safe cabling!
                                  If you do not need individual components, or want to exchange them for others, write us briefly, we will then change the offer immediately according to your wishes.
                                  The set includes the following components:
                                  • 1x DD Audio D5.1000 5-channel amplifier
                                  • 2x DD Audio VO-B1a tweeter
                                  • 2x DD Audio VO-MN6.5 bass-midrange driver
                                  • 1x DD Audio LE-M12D 30cm cabinet subwoofer
                                  • 1x Stinger SK4241 25mm² cable set incl. fuse (free of charge)
                                  • 1x Masori 25m 2,5mm² speaker cable (free of charge)
                                  What you could optionally
                                  use in addition:
                                  1. RCA cable. Do you have an aftermarket radio or a factory radio? If you have an aftermarket radio you need the right amount of RCA cables, which you can find under our accessories. You need 1 cable per channel. If you have a factory radio, connect the original speaker wires to the high inputs of the power amp, or use a separate Hi-Low converter.
                                  2. Attenuation. With the increased music power, trim parts can suddenly start to vibrate. For this purpose you can cover them from the inside with Alubutyl, this is also recommended for the inside of the vehicle sheet metal, with which you can create an even clearer sound reproduction, without disturbing noises.
                                  3. Additional battery. Depending on the existing vehicle battery, it is useful from about 600W total power of the amplifier, to install an additional battery. You can find this under our accessories -> batteries. For which amplifier power, the respective battery is useful, is noted in the title of the batteries.
                                  4. Capacitor (PowerCap). A capacitor compensates for the voltage drops that can occur in the vehicle electrical system during strong bass hits. This is noticeable by an unclean bass reproduction, or slightly dimming lights in the interior. Here, a power cap or an additional battery provides a remedy.
                                  5. Rear system. The speakers in the rear doors of your car do not have the same power as the front system. Generally it is sufficient to replace only the front system. However, if you want a homogeneous sound from all speakers, we will be happy to create an individual complete set for you.
                                  6. Subwoofer enclosures: We also offer individual subwoofer enclosures according to your specifications. Just send us an email with your maximum dimensions/idea (preferably with a hand sketch) and we will calculate and build you a ready-made custom cabinet.

                                  Key Features DD Audio D5.1000 5-channel amplifier:

                                  • 5-channel amplifier in compact design
                                  • 1Ohm stable
                                  • Dimensions: 450 x 175 x 55 mm
                                  • Power @ 4Ω 14,4v 0,1% THD: 4x90 + 1x680 Watt
                                  • Power @ 2Ω 14,4v 0,1% THD: 4x140 + 1x810 Watt
                                  • Power @ 1Ω 14,4v 0,1% THD: + 1x1000 Watt

                                  Key Features DD Audio VO-B1a Tweeter:

                                  • VO-B1a Bullet Tweeter Series
                                  • Power: 50W RMS
                                  • Peak power: 100W
                                  • voice coil diameter: 1"
                                  • Impedance: 4 ohm
                                  • Frequency response (Hz): 3.5kHz - 20kHz
                                  • Efficiency in dBSPL: 104
                                  • Mounting diameter (MM): 59
                                  • Mounting depth (MM): 38

                                    Key Features DD Audio VO-MN6.5 bass-midrange driver:

                                    • 16.5cm (6.5") neodymium-driven woofer
                                    • Impedance - 4 Ohm
                                    • Power (RMS) - 60 Watts
                                    • Maximum output - 300 watts peak
                                    • Resonant Frequency - 106Hz
                                    • Sensitivity - 95.5 dB
                                    • Equivalent Volume Vas: 7.4l
                                    • Frequency Range - 100Hz-8KHz
                                    • Mounting depth: 70mm
                                    • Mounting diameter: 143mm
                                    • Outer Diameter: 165mm

                                              Key Features DD Audio LE-M12D 30cm cabinet subwoofer:

                                              • DD Redline Series Subwoofer
                                              • 12" (30cm) sandwich paper cone
                                              • D2 (2x2Ohm) impedance
                                              • Patented ferrite magnet system
                                              • Lossless linear suspension
                                              • Foam surround
                                              • Die cast aluminium basket
                                              • Tuning frequency: 40 Hz
                                              • Recommended amplifier power: 600 Watt RMS
                                              • Dimensions: 510 x 380 x 305 mm

                                                  Key Features Stinger SK4241 25mm² Cable Set:

                                                  • Cable set for a maximum amplifier power of 1500 watts (RMS) / 150A.
                                                  • Cable cross section: 25 mm² made of 100% copper!
                                                  • Scope of delivery:
                                                    • 5,5m Hyper-Twist 4GA 25mm² OFC power cable (matt red)
                                                    • 0,9m Hyper-Twist 4GA 25mm² OFC ground cable (matt-black)
                                                    • 5,18m 0,82mm² remote power cable (matt-blue)
                                                    • 60A Fuse
                                                    • Fuse holder SPD5101 AGU
                                                    • 25mm² crimp ring terminals, pre-installed
                                                    • 1.5mm² Piston Connector (blue)
                                                    • 25mm² Snap In Protective Fire Sleeve
                                                    • Mounting screws
                                                    • 10x cable ties (17,8cm / 7")

                                                                  €1.474,85 €1.367,96 SPARE €106,89

                                                                  inkl. MwSt., zzgl. Versand

                                                                  1 set
                                                                  Delivery time: 5-10 days