Our complete sets consist of perfectly matched components that fit together perfectly in terms of both sound and performance to create a harmonious sound image.
The components were put together so that the amplifiers produce the maximum possible performance with the selected speakers.

The set includes everything you need for complete and safe cabling!
If you do not need individual components, or want to exchange them for others, write us briefly, we will then change the offer immediately according to your wishes.
The set includes the following components:
  • 1x HERTZ Compact Power HCP 5D 5-channel amplifier
  • 1x HERTZ Mille Pro MPK 165.3 front system
  • 1x DD Audio LE-M06D 16,5cm subwoofer
  • 1x Stinger SK4241 25mm² cable set incl. fuse (free of charge)
  • 1x 15m 2,5mm² speaker cable (free of charge)
What you could optionally
use in addition:
  1. RCA cable. Do you have an aftermarket radio or a factory radio? If you have an aftermarket radio, you need the appropriate number of RCA cables, which you can find under our accessories. You need 1 cable per channel. If you have a factory radio, connect the original speaker wires to the high inputs of the power amp, or use a separate Hi-Low converter.
  2. Attenuation. With the increased music power, trim parts can suddenly start to vibrate. For this purpose you can cover them from the inside with Alubutyl, this is also recommended for the inside of the vehicle sheet metal, with which you can create an even clearer sound reproduction, without disturbing noises.
  3. Additional battery. Depending on the existing vehicle battery, it is useful from about 600W total power of the amplifier, to install an additional battery. You can find this under our accessories -> batteries. For which amplifier power, the respective battery is useful, is noted in the title of the batteries.
  4. Capacitor (PowerCap). A capacitor compensates for the voltage drops that can occur in the vehicle electrical system during strong bass hits. This is noticeable by an unclean bass reproduction, or slightly dimming lights in the interior. Here, a power cap or an additional battery provides a remedy.
  5. Rear system. The speakers in the rear doors of your car do not have the same power as the front system. Generally it is sufficient to replace only the front system. However, if you want a homogeneous sound from all speakers, we will be happy to create an individual complete set for you.

Key Features HERTZ HCP 5D Amplifier:

  • 5-channel amplifier of the Hertz Compact Power series.
  • Impedance minimum: for 5 channel operation 2 Ohm / for 3 channel operation 4 Ohm + 2 Ohm
  • Power: 4x 65W + 1x 200W at 4 Ohm
  • Power: 4x 105W + 1x 330W at 2 Ohm
  • Power: 2x 210W + 1x 200W at 4 Ohm
  • power: 2x 210W at 4 Ohm + 1x 330W at 2 Ohm
  • Dimensions: 345 x 190 x 50 mm (length x width x height)
  • Weight: 2,61 kg

Key Features HERTZ Mille Pro MPK 165.3 Front System:

  • 2-way 6.5" (16.5cm) front system set of the Hertz Mille Pro series.
  • The set consists of:
    • 2x Hertz MP25.3 tweeter
    • 2x MP165.3 bass-midrange driver
    • 2x crossover MPCX 2.3
  • diaphragm diameter: 165mm / 25mm
  • Power handling: 220/110 Watt Max/RMS
  • Impedance: 4Ohm
  • Frequency response: 40Hz - 22,5khz
  • Efficiency: 92db spl

    Key Features DD Audio LE-M06D Subwoofer:

    • DD Redline Series Subwoofer
    • 6,5" (16,5cm) sandwich paper cone
    • D2 (2x2Ohm) impedance
    • Patented ferrite magnet system
    • Lossless linear suspension
    • Foam surround
    • Die cast aluminium basket
    • Tuning frequency: 44 Hz
    • Recommended amplifier power: 300 Watt RMS
    • Dimensions: 368 x 266 x 241 mm

    Key Features Stinger SK4241 25mm² Cable Set:

    • Cable set for a maximum amplifier power of 1500 watts (RMS) / 150A
    • Cable cross section: 25 mm² made of 100% copper!
    • Scope of delivery:
      • 5,5m Hyper-Twist 4GA 25mm² OFC power cable (matt red)
      • 0,9m Hyper-Twist 4GA 25mm² OFC ground cable (matt-black)
      • 5,18m 0,82mm² remote power cable (matt-blue)
      • 60A Fuse
      • Fuse holder SPD5101 AGU
      • 25mm² crimp ring terminals, pre-installed
      • 1.5mm² Piston Connector (blue)
      • 25mm² Snap In Protective Fire Sleeve
      • Mounting screws
      • 10x cable ties (17,8cm / 7")
      Rated 5/5 based on 28 customer reviews
      Benedikt Golla - by , Feb 07, 2021

      SOUND-START complete set DD Audio, HERTZ

      Masori SOUND-START Komplettset DD Audio, HERTZ Sound-Start
      Masori SOUND-START Komplettset DD Audio, HERTZ Sound-Start
      Masori SOUND-START Komplettset DD Audio, HERTZ Sound-Start
      Masori SOUND-START Komplettset DD Audio, HERTZ Sound-Start
      Masori SOUND-START Komplettset DD Audio, HERTZ Sound-Start
      Masori SOUND-START Komplettset DD Audio, HERTZ Sound-Start

      SOUND-START complete set DD Audio, HERTZ

      🚀 ANGEBOT

      Masori

      Regular price €919,98 €819,99 SPARE €99,99

      inkl. MwSt., zzgl. Versand

      Our complete sets consist of perfectly matched components that fit together perfectly in terms of both sound and performance to create a harmonious sound image.
      The components were put together so that the amplifiers produce the maximum possible performance with the selected speakers.

      The set includes everything you need for complete and safe cabling!
      If you do not need individual components, or want to exchange them for others, write us briefly, we will then change the offer immediately according to your wishes.
      The set includes the following components:
      • 1x HERTZ Compact Power HCP 5D 5-channel amplifier
      • 1x HERTZ Mille Pro MPK 165.3 front system
      • 1x DD Audio LE-M06D 16,5cm subwoofer
      • 1x Stinger SK4241 25mm² cable set incl. fuse (free of charge)
      • 1x 15m 2,5mm² speaker cable (free of charge)
      What you could optionally
      use in addition:
      1. RCA cable. Do you have an aftermarket radio or a factory radio? If you have an aftermarket radio, you need the appropriate number of RCA cables, which you can find under our accessories. You need 1 cable per channel. If you have a factory radio, connect the original speaker wires to the high inputs of the power amp, or use a separate Hi-Low converter.
      2. Attenuation. With the increased music power, trim parts can suddenly start to vibrate. For this purpose you can cover them from the inside with Alubutyl, this is also recommended for the inside of the vehicle sheet metal, with which you can create an even clearer sound reproduction, without disturbing noises.
      3. Additional battery. Depending on the existing vehicle battery, it is useful from about 600W total power of the amplifier, to install an additional battery. You can find this under our accessories -> batteries. For which amplifier power, the respective battery is useful, is noted in the title of the batteries.
      4. Capacitor (PowerCap). A capacitor compensates for the voltage drops that can occur in the vehicle electrical system during strong bass hits. This is noticeable by an unclean bass reproduction, or slightly dimming lights in the interior. Here, a power cap or an additional battery provides a remedy.
      5. Rear system. The speakers in the rear doors of your car do not have the same power as the front system. Generally it is sufficient to replace only the front system. However, if you want a homogeneous sound from all speakers, we will be happy to create an individual complete set for you.

      Key Features HERTZ HCP 5D Amplifier:

      • 5-channel amplifier of the Hertz Compact Power series.
      • Impedance minimum: for 5 channel operation 2 Ohm / for 3 channel operation 4 Ohm + 2 Ohm
      • Power: 4x 65W + 1x 200W at 4 Ohm
      • Power: 4x 105W + 1x 330W at 2 Ohm
      • Power: 2x 210W + 1x 200W at 4 Ohm
      • power: 2x 210W at 4 Ohm + 1x 330W at 2 Ohm
      • Dimensions: 345 x 190 x 50 mm (length x width x height)
      • Weight: 2,61 kg

      Key Features HERTZ Mille Pro MPK 165.3 Front System:

      • 2-way 6.5" (16.5cm) front system set of the Hertz Mille Pro series.
      • The set consists of:
        • 2x Hertz MP25.3 tweeter
        • 2x MP165.3 bass-midrange driver
        • 2x crossover MPCX 2.3
      • diaphragm diameter: 165mm / 25mm
      • Power handling: 220/110 Watt Max/RMS
      • Impedance: 4Ohm
      • Frequency response: 40Hz - 22,5khz
      • Efficiency: 92db spl

        Key Features DD Audio LE-M06D Subwoofer:

        • DD Redline Series Subwoofer
        • 6,5" (16,5cm) sandwich paper cone
        • D2 (2x2Ohm) impedance
        • Patented ferrite magnet system
        • Lossless linear suspension
        • Foam surround
        • Die cast aluminium basket
        • Tuning frequency: 44 Hz
        • Recommended amplifier power: 300 Watt RMS
        • Dimensions: 368 x 266 x 241 mm

        Key Features Stinger SK4241 25mm² Cable Set:

        • Cable set for a maximum amplifier power of 1500 watts (RMS) / 150A
        • Cable cross section: 25 mm² made of 100% copper!
        • Scope of delivery:
          • 5,5m Hyper-Twist 4GA 25mm² OFC power cable (matt red)
          • 0,9m Hyper-Twist 4GA 25mm² OFC ground cable (matt-black)
          • 5,18m 0,82mm² remote power cable (matt-blue)
          • 60A Fuse
          • Fuse holder SPD5101 AGU
          • 25mm² crimp ring terminals, pre-installed
          • 1.5mm² Piston Connector (blue)
          • 25mm² Snap In Protective Fire Sleeve
          • Mounting screws
          • 10x cable ties (17,8cm / 7")

          €919,98 €819,99 SPARE €99,99

          inkl. MwSt., zzgl. Versand

          1 set
          Delivery time: 5-10 days