Our complete sets consist of perfectly matched components that fit together perfectly in terms of both sound and performance to create a harmonious sound image.
The components were assembled so that the amplifiers produce the maximum possible performance with the selected speakers.

The set includes everything you need for complete and safe cabling!
If you do not need individual components, or want to exchange them for others, write us briefly, we will change the offer immediately according to your wishes.
The set includes the following components:
  • 1x DD Audio D4.90 4-channel amplifier
  • 1x DD Audio CC6.5A front system
  • 1x DD Audio LE-M10D 25cm subwoofer
  • 1x Stinger SK4281 10mm² cable set incl. fuse(free of charge)
  • 1x 15m 1,5mm² speaker cable(free of charge)
What you optional you could use in addition:
  1. RCA cable. Do you have an aftermarket radio or a factory radio? For an aftermarket radio you need the appropriate number of RCA cables, which you can find under our accessories. You need 1 cable per channel. If you have a factory radio, connect the original speaker wires to the high inputs of the power amp, or use a separate Hi-Low converter.
  2. Attenuation. With the increased music power, trim parts can suddenly start to vibrate. This can be done by covering them from the inside with Alubutyl, this is also recommended for the inside of the vehicle sheet metal, which creates an even clearer sound reproduction, without noise.
  3. Additional battery. Depending on the existing vehicle battery, it makes sense from about 600W total power of the amplifier, to install an additional battery. You can find this under our accessories -> batteries. For which amplifier power, the respective battery is useful, is noted in the title of the batteries.
  4. Capacitor (PowerCap). A capacitor compensates for the voltage drops that can occur in the vehicle electrical system during strong bass hits. This is noticeable by an unclean bass reproduction, or slightly dimming lights in the interior. A power cap or an additional battery can help here.
  5. Rear system. The speakers in the rear doors of your car do not have the same power as the front system. Generally it is sufficient to replace only the front system. However, if you want a homogeneous sound from all speakers, we will be happy to create an individual complete set for you.

Key Features DD Audio D4.90 4-channel amplifier:

  • 4-channel amplifier in compact design
  • 2-Ohm stable
  • Power @ 4Ω: 4 x 90 W
  • Power @ 2Ω: 4 x 120 W
  • Power @ 4Ω: 2 x 240 W
  • Signal to noise ratio 80dB
  • Dimensions: 233 x 125 x 47 mm

Key Features DD Audio CC 6.5A Front System:

  • 2-way DD Audio C-Series speaker set
  • The set contains:
    • 2 pcs. CT28 tweeter (19 mm)
    • 2 pcs. CC6.5A woofer (165 mm),
    • 2 crossovers,
    • tweeter pods (built-in capsules)
  • bass-midrange driver:
    • Power: 75 watts RMS
    • Peak power: 180 watts
    • Impedance: 4 Ohm
    • frequency response (Hz): 50 - 20k
    • Mounting diameter: 14,5cm
    • Mounting depth: 6cm
  • Tweeter:
    • Driver size: 28mm
    • Power: 50 - 125 watts RMS
    • Voice coil diameter: 28mm
    • Impedance: 4 Ohm
    • frequency response (Hz): 3k - 25kHz
    • Mounting diameter: 4,8cm
    • Mounting depth: 1,27cm

    Key Features DD Audio LE-M10D Subwoofer:

    • DD Redline Series Subwoofer
    • 10" (25cm) sandwich paper cone
    • D2 (2x2Ohm) impedance
    • Patented ferrite magnet system
    • Lossless linear suspension
    • Foam surround
    • Aluminum die cast basket
    • Tuning frequency: 40 Hz
    • Recommended amplifier power: 500 watts RMS
    • Dimensions: 482 x 279 x 304 mm

    Key Features: Stinger SK4281 10mm² cable set:

    • Cable set for a maximum amplifier power of 600 watts (RMS) / 60A.
    • Cable cross section: 10 mm² made of 100% copper!
    • Scope of delivery:
      • 5,5m Hyper-Twist 10mm² OFC power cable (matt red)
      • 0,9m Hyper-Twist 10mm² OFC ground cable (matt-black)
      • 5.18m 0.82mm² remote power on cable (matte blue)
      • 60A fuse
      • Fuse holder SPD5101 AGU
      • 10 mm² crimp ring terminals, pre-installed
      • 1.5 mm² piston connector (blue)
      • 10 mm² snap in protective fire sleeve
      • Mounting screws
      • 10x cable tie 17,8cm
      Rated 5/5 based on 28 customer reviews
      Benedikt Golla - by , Feb 07, 2021

      SOUND-START Komplettset DD Audio

      Masori SOUND-START complete set DD Audio - Sound-Start - Masori.co.uk
      Masori SOUND-START complete set DD Audio - Sound-Start - Masori.co.uk
      Masori SOUND-START complete set DD Audio - Sound-Start - Masori.co.uk
      Masori SOUND-START complete set DD Audio - Sound-Start - Masori.co.uk
      Masori SOUND-START complete set DD Audio - Sound-Start - Masori.co.uk
      Masori SOUND-START complete set DD Audio - Sound-Start - Masori.co.uk

      SOUND-START Komplettset DD Audio

      ⏱ ANGEBOT

      Masori

      Regular price €877,97* €808,98 SPARE €68,99

      inkl. MwSt., zzgl. Shipping

      Our complete sets consist of perfectly matched components that fit together perfectly in terms of both sound and performance to create a harmonious sound image.
      The components were assembled so that the amplifiers produce the maximum possible performance with the selected speakers.

      The set includes everything you need for complete and safe cabling!
      If you do not need individual components, or want to exchange them for others, write us briefly, we will change the offer immediately according to your wishes.
      The set includes the following components:
      • 1x DD Audio D4.90 4-channel amplifier
      • 1x DD Audio CC6.5A front system
      • 1x DD Audio LE-M10D 25cm subwoofer
      • 1x Stinger SK4281 10mm² cable set incl. fuse(free of charge)
      • 1x 15m 1,5mm² speaker cable(free of charge)
      What you optional you could use in addition:
      1. RCA cable. Do you have an aftermarket radio or a factory radio? For an aftermarket radio you need the appropriate number of RCA cables, which you can find under our accessories. You need 1 cable per channel. If you have a factory radio, connect the original speaker wires to the high inputs of the power amp, or use a separate Hi-Low converter.
      2. Attenuation. With the increased music power, trim parts can suddenly start to vibrate. This can be done by covering them from the inside with Alubutyl, this is also recommended for the inside of the vehicle sheet metal, which creates an even clearer sound reproduction, without noise.
      3. Additional battery. Depending on the existing vehicle battery, it makes sense from about 600W total power of the amplifier, to install an additional battery. You can find this under our accessories -> batteries. For which amplifier power, the respective battery is useful, is noted in the title of the batteries.
      4. Capacitor (PowerCap). A capacitor compensates for the voltage drops that can occur in the vehicle electrical system during strong bass hits. This is noticeable by an unclean bass reproduction, or slightly dimming lights in the interior. A power cap or an additional battery can help here.
      5. Rear system. The speakers in the rear doors of your car do not have the same power as the front system. Generally it is sufficient to replace only the front system. However, if you want a homogeneous sound from all speakers, we will be happy to create an individual complete set for you.

      Key Features DD Audio D4.90 4-channel amplifier:

      • 4-channel amplifier in compact design
      • 2-Ohm stable
      • Power @ 4Ω: 4 x 90 W
      • Power @ 2Ω: 4 x 120 W
      • Power @ 4Ω: 2 x 240 W
      • Signal to noise ratio 80dB
      • Dimensions: 233 x 125 x 47 mm

      Key Features DD Audio CC 6.5A Front System:

      • 2-way DD Audio C-Series speaker set
      • The set contains:
        • 2 pcs. CT28 tweeter (19 mm)
        • 2 pcs. CC6.5A woofer (165 mm),
        • 2 crossovers,
        • tweeter pods (built-in capsules)
      • bass-midrange driver:
        • Power: 75 watts RMS
        • Peak power: 180 watts
        • Impedance: 4 Ohm
        • frequency response (Hz): 50 - 20k
        • Mounting diameter: 14,5cm
        • Mounting depth: 6cm
      • Tweeter:
        • Driver size: 28mm
        • Power: 50 - 125 watts RMS
        • Voice coil diameter: 28mm
        • Impedance: 4 Ohm
        • frequency response (Hz): 3k - 25kHz
        • Mounting diameter: 4,8cm
        • Mounting depth: 1,27cm

        Key Features DD Audio LE-M10D Subwoofer:

        • DD Redline Series Subwoofer
        • 10" (25cm) sandwich paper cone
        • D2 (2x2Ohm) impedance
        • Patented ferrite magnet system
        • Lossless linear suspension
        • Foam surround
        • Aluminum die cast basket
        • Tuning frequency: 40 Hz
        • Recommended amplifier power: 500 watts RMS
        • Dimensions: 482 x 279 x 304 mm

        Key Features: Stinger SK4281 10mm² cable set:

        • Cable set for a maximum amplifier power of 600 watts (RMS) / 60A.
        • Cable cross section: 10 mm² made of 100% copper!
        • Scope of delivery:
          • 5,5m Hyper-Twist 10mm² OFC power cable (matt red)
          • 0,9m Hyper-Twist 10mm² OFC ground cable (matt-black)
          • 5.18m 0.82mm² remote power on cable (matte blue)
          • 60A fuse
          • Fuse holder SPD5101 AGU
          • 10 mm² crimp ring terminals, pre-installed
          • 1.5 mm² piston connector (blue)
          • 10 mm² snap in protective fire sleeve
          • Mounting screws
          • 10x cable tie 17,8cm

          €877,97* €808,98 SPARE €68,99

          inkl. MwSt., zzgl. Shipping

          1 Set
          Delivery time: 5-10 days