Our complete sets consist of components that are perfectly matched to each other, both in terms of sound and performance, to create a harmonious sound image.
The components were put together in such a way that the amplifiers produce the maximum possible performance with the selected speakers.

The set includes everything you need for complete and safe cabling!
If you do not need individual components, or want to exchange them for others, write us briefly, we will then change the offer immediately according to your wishes.
The set includes the following components:
  • 1x Audison SR4.300 4-channel amplifier
  • 1x Audison Voce K6 front system
  • 1x Audison Voce AV 10 25cm Subwoofer
  • 1x Masori 10 inch subwoofer cabinet bass reflex with 25l (free of charge)
  • 1x Stinger SK4281 10mm² cable set incl. fuse (free of charge)
  • 1x 15m 1,5mm² speaker cable (free of charge)
What you could optionally
use in addition:
  1. RCA cable. Do you have an aftermarket radio or a factory radio? If you have an aftermarket radio, you need the right amount of RCA cables, which you can find under our accessories. You need 1 cable per channel. If you have a factory radio, connect the original speaker wires to the high inputs of the power amp, or use a separate Hi-Low converter.
  2. Attenuation. With the increased music power, trim parts can suddenly start to vibrate. For this purpose you can cover them from the inside with Alubutyl, this is also recommended for the inside of the vehicle sheet metal, with which you can create an even clearer sound reproduction, without disturbing noises.
  3. Additional battery. Depending on the existing vehicle battery, it is useful from about 600W total power of the amplifier, to install an additional battery. You can find this under our accessories -> batteries. For which amplifier power, the respective battery is useful, is noted in the title of the batteries.
  4. Capacitor (PowerCap). A capacitor compensates for the voltage drops that can occur in the vehicle electrical system during strong bass hits. This is noticeable by an unclean bass reproduction, or slightly dimming lights in the interior. Here, a power cap or an additional battery provides a remedy.
  5. Rear system. The speakers in the rear doors of your car do not have the same power as the front system. Generally it is sufficient to replace only the front system. However, if you want a homogeneous sound from all speakers, we will be happy to create an individual complete set for you.

Key Features Audison SR 4.300 4-channel amplifier:

  • 4-channel amplifier
  • Power into 4/2 Ohm: 4 x 85/130W (2x 250W into 4 Ohm bridged)
  • Bandwidth: 10 - 35000Hz
  • S/N Ratio: 100dBA
  • Input voltage: 6,5 - 17V DC
  • High level input with USS module
  • 2x RCA input
  • 1x cinch output (full range)

Key Features Audison Voce K6 Front System:

  • Audison Voce Series
  • 2-way component system
  • Consisting of:
  • Power: 125 W RMS
  • Maximum power: 250 W
  • Impedance 4 Ω
  • Frequency response 50 - 22k Hz
  • Sensitivity 91 dB/Spl
  • Grilles included for the mid-bass driver

      Key Features Audison Voce AV10 Subwoofer:

      • Audison Voce Series
      • 10" (25cm) subwoofer
      • Power: 400 W RMS
      • Power: 800 W Maximum
      • Impedance 4 Ω
      • Frequency response 30 ÷ 1k Hz
      • Sensitivity 91 dB/SPL
      • Xmax +- 14mm
      • Can be used with or without grille! (is included in delivery)

      Key Features Masori 10" bass reflex enclosure with 25l:

      • Material MDF 18mm
      • cabinet volume 25L
      • Dimensions 435 x 300 x 345mm
      • Fabric colour black melange

      Key Features Stinger SK4281 10mm² cable set:

      • Cable set for a maximum amplifier power of 600 watts (RMS) / 60A.
      • Cable cross section: 10 mm² made of 100% copper!
      • Scope of delivery:
        • 5,5m Hyper-Twist 10mm² OFC power cable (matt red)
        • 0,9m Hyper-Twist 10mm² OFC ground cable (matt-black)
        • 5,18m 0,82mm² remote power cable (matt-blue)
        • 60A fuse
        • Fuse holder SPD5101 AGU
        • 10mm² crimp ring terminals, pre-installed
        • 1.5mm² Piston Connector (blue)
        • 10mm² Snap In Protective Fire Sleeve
        • Mounting screws
        • 10x cable ties 17,8cm
        Rated 5/5 based on 28 customer reviews
        Benedikt Golla - by , Feb 07, 2021

        SOUND-START complete set Audison

        Masori SOUND-START Komplettset Audison Sound-Start
        Masori SOUND-START Komplettset Audison Sound-Start
        Masori SOUND-START Komplettset Audison Sound-Start
        Masori SOUND-START Komplettset Audison Sound-Start
        Masori SOUND-START Komplettset Audison Sound-Start
        Masori SOUND-START Komplettset Audison Sound-Start
        Masori SOUND-START Komplettset Audison Sound-Start

        SOUND-START complete set Audison

        🚀 ANGEBOT

        Masori

        Regular price €962,87 €828,98 SPARE €133,89

        inkl. MwSt., zzgl. Versand

        Our complete sets consist of components that are perfectly matched to each other, both in terms of sound and performance, to create a harmonious sound image.
        The components were put together in such a way that the amplifiers produce the maximum possible performance with the selected speakers.

        The set includes everything you need for complete and safe cabling!
        If you do not need individual components, or want to exchange them for others, write us briefly, we will then change the offer immediately according to your wishes.
        The set includes the following components:
        • 1x Audison SR4.300 4-channel amplifier
        • 1x Audison Voce K6 front system
        • 1x Audison Voce AV 10 25cm Subwoofer
        • 1x Masori 10 inch subwoofer cabinet bass reflex with 25l (free of charge)
        • 1x Stinger SK4281 10mm² cable set incl. fuse (free of charge)
        • 1x 15m 1,5mm² speaker cable (free of charge)
        What you could optionally
        use in addition:
        1. RCA cable. Do you have an aftermarket radio or a factory radio? If you have an aftermarket radio, you need the right amount of RCA cables, which you can find under our accessories. You need 1 cable per channel. If you have a factory radio, connect the original speaker wires to the high inputs of the power amp, or use a separate Hi-Low converter.
        2. Attenuation. With the increased music power, trim parts can suddenly start to vibrate. For this purpose you can cover them from the inside with Alubutyl, this is also recommended for the inside of the vehicle sheet metal, with which you can create an even clearer sound reproduction, without disturbing noises.
        3. Additional battery. Depending on the existing vehicle battery, it is useful from about 600W total power of the amplifier, to install an additional battery. You can find this under our accessories -> batteries. For which amplifier power, the respective battery is useful, is noted in the title of the batteries.
        4. Capacitor (PowerCap). A capacitor compensates for the voltage drops that can occur in the vehicle electrical system during strong bass hits. This is noticeable by an unclean bass reproduction, or slightly dimming lights in the interior. Here, a power cap or an additional battery provides a remedy.
        5. Rear system. The speakers in the rear doors of your car do not have the same power as the front system. Generally it is sufficient to replace only the front system. However, if you want a homogeneous sound from all speakers, we will be happy to create an individual complete set for you.

        Key Features Audison SR 4.300 4-channel amplifier:

        • 4-channel amplifier
        • Power into 4/2 Ohm: 4 x 85/130W (2x 250W into 4 Ohm bridged)
        • Bandwidth: 10 - 35000Hz
        • S/N Ratio: 100dBA
        • Input voltage: 6,5 - 17V DC
        • High level input with USS module
        • 2x RCA input
        • 1x cinch output (full range)

        Key Features Audison Voce K6 Front System:

        • Audison Voce Series
        • 2-way component system
        • Consisting of:
        • Power: 125 W RMS
        • Maximum power: 250 W
        • Impedance 4 Ω
        • Frequency response 50 - 22k Hz
        • Sensitivity 91 dB/Spl
        • Grilles included for the mid-bass driver

            Key Features Audison Voce AV10 Subwoofer:

            • Audison Voce Series
            • 10" (25cm) subwoofer
            • Power: 400 W RMS
            • Power: 800 W Maximum
            • Impedance 4 Ω
            • Frequency response 30 ÷ 1k Hz
            • Sensitivity 91 dB/SPL
            • Xmax +- 14mm
            • Can be used with or without grille! (is included in delivery)

            Key Features Masori 10" bass reflex enclosure with 25l:

            • Material MDF 18mm
            • cabinet volume 25L
            • Dimensions 435 x 300 x 345mm
            • Fabric colour black melange

            Key Features Stinger SK4281 10mm² cable set:

            • Cable set for a maximum amplifier power of 600 watts (RMS) / 60A.
            • Cable cross section: 10 mm² made of 100% copper!
            • Scope of delivery:
              • 5,5m Hyper-Twist 10mm² OFC power cable (matt red)
              • 0,9m Hyper-Twist 10mm² OFC ground cable (matt-black)
              • 5,18m 0,82mm² remote power cable (matt-blue)
              • 60A fuse
              • Fuse holder SPD5101 AGU
              • 10mm² crimp ring terminals, pre-installed
              • 1.5mm² Piston Connector (blue)
              • 10mm² Snap In Protective Fire Sleeve
              • Mounting screws
              • 10x cable ties 17,8cm

              €962,87 €828,98 SPARE €133,89

              inkl. MwSt., zzgl. Versand

              1 set
              Delivery time: 5-10 days