Our complete sets consist of perfectly matched components that fit together perfectly in terms of both sound and performance to create a harmonious sound image.

The components were put together so that the amplifiers produce the maximum possible performance with the selected speakers.

The set includes everything you need for complete and safe cabling!

If you do not need individual components, or want to exchange them for others, write us briefly, we will then immediately change the offer according to your wishes.

The set includes the following components:

  • 1x HERTZ Mille Power ML Power 5 5-channel amplifier
  • 2x Scanspeak Automotive Silver D3004-602006 tweeter
  • 2x Scanspeak Automotive Silver 16W-4531G06 bass-midrange driver
  • 1x Scanspeak Automotive Silver 26W-4558T06 26cm Subwoofer
  • 1x Audison Bit Ten DSP Sound Processor
  • 1x Masori 10" bass reflex cabinet 35l (free of charge)
  • 1x Stinger SK4241 25mm² cable set incl. fuse (free of charge)
  • 1x 25m 2,5mm² speaker cable (free of charge)

What you could optionally

still use:
  1. RCA cable. Do you have an aftermarket radio or a factory radio? If you have an aftermarket radio, you need the right amount of RCA cables, which you can find under our accessories. You need 1 cable per channel. If you have a factory radio, connect the original speaker wires to the high inputs of the power amp, or use a separate Hi-Low converter.
  2. Attenuation. With the increased music power, trim parts can suddenly start to vibrate. For this purpose you can cover them from the inside with Alubutyl, this is also recommended for the inside of the vehicle sheet metal, with which you can create an even clearer sound reproduction, without disturbing noises.
  3. Additional battery. Depending on the existing vehicle battery, it is useful from about 600W total power of the amplifier, to install an additional battery. You can find this under our accessories -> batteries. For which amplifier power, the respective battery is useful, is noted in the title of the batteries.
  4. Capacitor (PowerCap). A capacitor compensates for the voltage drops that can occur in the vehicle electrical system during strong bass hits. This is noticeable by an unclean bass reproduction, or slightly dimming lights in the interior. Here a Powercap, or also an auxiliary battery creates remedy.

Key Features HERTZ Mille Power ML Power 5 5-channel amplifier:

  • 5-channel Class-D amplifier of the Hertz Mille Pro series
  • Impedance Minimal 2 Ohm
  • Power: 4x 70 W into 4 Ohm + 1x 380 W into 4 Ohm
  • Power: 4x 100 W at 2 Ohm + 1x 550 W at 2 Ohm
  • Power: 2x 200 W at 4 Ohm + 1x 380 W at 4 Ohm
  • Power: 2x 200 W at 4 Ohm + 1x 550 W at 2 Ohm
  • Bass level remote control Hertz HRC BM optional. Just write us a comment in your order!
  • Dimensions: 349 x 170 x 46.7 mm (length x width x height)
  • Weight: 3,09 kg

Key Features Scanspeak Automotive Silver D3004-602006 Tweeter:

  • Scanspeak Automotive Silver-Series Tweeter
  • 1" (26mm) ring radiator
  • 4 Ohm impedance
  • Neodymium Magnet System
  • Sound Transparent Grille
  • Die-cast enclosure & custom molded rear plate

Key Features Scanspeak Automotive Silver 16W-4531G06 Woofer:

  • Scanspeak Automotive Silver-Series bass-midrange driver
  • 6.5" (16.5cm) sandwich paper cone
  • 4 Ohm impedance
  • resonant frequency Fs: 51 Hz
  • Q factor Qt: 0.59
  • Xmax ± 6,5mm
  • Patented symmetrical neodymium magnet system
  • Lossless linear suspension
  • Rubber surround

Key Features Scanspeak Automotive Silver 26W-4558T06 26cm Subwoofer:

  • Scanspeak Automotive Silver-Series Subwoofer.
  • 10" (26cm) aluminum cone
  • Fiberglass Dustcap
  • 4 Ohm impedance
  • Patented double ferrite magnet system
  • Resonant frequency Fs: 21 Hz
  • Sensitivity: 88dB
  • Quality Qt: 0.31
  • Equivalent volume Vas: 95 l
  • Xmax ± 25mm

Key Features Audison Bit Ten DSP Sound Processor:

  • 5-channel digital signal processor
  • Max. Output level : 4 V
  • Dimensions: 191 x 34 x 130 mm
  • Weight: 0.6 kg
  • DRC control panel included

Key Features Masori 10" bass reflex cabinet 35l:

  • Material MDF 18mm
  • Enclosure volume 35L
  • Speaker size 25cm / 10 inch
  • Max. Installation depth 230mm
  • Hole diameter 232mm
  • Max. Subwoofer outer diameter 272mm
  • Dimensions 495 x 330 x 365mm
  • Fabric colour Black melange

Key Features: Stinger SK4241 25mm² cable set:

  • Cable set for a maximum amplifier power of 1500 watts (RMS) / 150A.
  • Cable cross section: 25 mm² made of 100% copper!
  • Scope of delivery:
    • 5,5m Hyper-Twist 4GA 25mm² OFC power cable (matt red)
    • 0,9m Hyper-Twist 4GA 25mm² OFC ground cable (matt-black)
    • 5,18m 0,82mm² remote power cable (matt-blue)
    • 60A Fuse
    • Fuse holder SPD5101 AGU
    • 25mm² crimp ring terminals, pre-installed
    • 1.5mm² Piston Connector (blue)
    • 25mm² Snap In Protective Fire Sleeve
    • Mounting screws
    • 10x cable ties (17,8cm / 7")
Rated 5/5 based on 28 customer reviews
Benedikt Golla - by , Feb 07, 2021

SOUND-PRO complete set Audison, HERTZ, Scanspeak

Masori SOUND-PRO Komplettset Audison, HERTZ, Scanspeak Sound-Pro
Masori SOUND-PRO Komplettset Audison, HERTZ, Scanspeak Sound-Pro
Masori SOUND-PRO Komplettset Audison, HERTZ, Scanspeak Sound-Pro
Masori SOUND-PRO Komplettset Audison, HERTZ, Scanspeak Sound-Pro
Masori SOUND-PRO Komplettset Audison, HERTZ, Scanspeak Sound-Pro
Masori SOUND-PRO Komplettset Audison, HERTZ, Scanspeak Sound-Pro
Masori SOUND-PRO Komplettset Audison, HERTZ, Scanspeak Sound-Pro
Masori SOUND-PRO Komplettset Audison, HERTZ, Scanspeak Sound-Pro
Masori SOUND-PRO Komplettset Audison, HERTZ, Scanspeak Sound-Pro

SOUND-PRO complete set Audison, HERTZ, Scanspeak

Masori

Regular price €2.225,79 €2.054,00 SPARE €171,79

inkl. MwSt., zzgl. Versand

Our complete sets consist of perfectly matched components that fit together perfectly in terms of both sound and performance to create a harmonious sound image.

The components were put together so that the amplifiers produce the maximum possible performance with the selected speakers.

The set includes everything you need for complete and safe cabling!

If you do not need individual components, or want to exchange them for others, write us briefly, we will then immediately change the offer according to your wishes.

The set includes the following components:

  • 1x HERTZ Mille Power ML Power 5 5-channel amplifier
  • 2x Scanspeak Automotive Silver D3004-602006 tweeter
  • 2x Scanspeak Automotive Silver 16W-4531G06 bass-midrange driver
  • 1x Scanspeak Automotive Silver 26W-4558T06 26cm Subwoofer
  • 1x Audison Bit Ten DSP Sound Processor
  • 1x Masori 10" bass reflex cabinet 35l (free of charge)
  • 1x Stinger SK4241 25mm² cable set incl. fuse (free of charge)
  • 1x 25m 2,5mm² speaker cable (free of charge)

What you could optionally

still use:
  1. RCA cable. Do you have an aftermarket radio or a factory radio? If you have an aftermarket radio, you need the right amount of RCA cables, which you can find under our accessories. You need 1 cable per channel. If you have a factory radio, connect the original speaker wires to the high inputs of the power amp, or use a separate Hi-Low converter.
  2. Attenuation. With the increased music power, trim parts can suddenly start to vibrate. For this purpose you can cover them from the inside with Alubutyl, this is also recommended for the inside of the vehicle sheet metal, with which you can create an even clearer sound reproduction, without disturbing noises.
  3. Additional battery. Depending on the existing vehicle battery, it is useful from about 600W total power of the amplifier, to install an additional battery. You can find this under our accessories -> batteries. For which amplifier power, the respective battery is useful, is noted in the title of the batteries.
  4. Capacitor (PowerCap). A capacitor compensates for the voltage drops that can occur in the vehicle electrical system during strong bass hits. This is noticeable by an unclean bass reproduction, or slightly dimming lights in the interior. Here a Powercap, or also an auxiliary battery creates remedy.

Key Features HERTZ Mille Power ML Power 5 5-channel amplifier:

  • 5-channel Class-D amplifier of the Hertz Mille Pro series
  • Impedance Minimal 2 Ohm
  • Power: 4x 70 W into 4 Ohm + 1x 380 W into 4 Ohm
  • Power: 4x 100 W at 2 Ohm + 1x 550 W at 2 Ohm
  • Power: 2x 200 W at 4 Ohm + 1x 380 W at 4 Ohm
  • Power: 2x 200 W at 4 Ohm + 1x 550 W at 2 Ohm
  • Bass level remote control Hertz HRC BM optional. Just write us a comment in your order!
  • Dimensions: 349 x 170 x 46.7 mm (length x width x height)
  • Weight: 3,09 kg

Key Features Scanspeak Automotive Silver D3004-602006 Tweeter:

  • Scanspeak Automotive Silver-Series Tweeter
  • 1" (26mm) ring radiator
  • 4 Ohm impedance
  • Neodymium Magnet System
  • Sound Transparent Grille
  • Die-cast enclosure & custom molded rear plate

Key Features Scanspeak Automotive Silver 16W-4531G06 Woofer:

  • Scanspeak Automotive Silver-Series bass-midrange driver
  • 6.5" (16.5cm) sandwich paper cone
  • 4 Ohm impedance
  • resonant frequency Fs: 51 Hz
  • Q factor Qt: 0.59
  • Xmax ± 6,5mm
  • Patented symmetrical neodymium magnet system
  • Lossless linear suspension
  • Rubber surround

Key Features Scanspeak Automotive Silver 26W-4558T06 26cm Subwoofer:

  • Scanspeak Automotive Silver-Series Subwoofer.
  • 10" (26cm) aluminum cone
  • Fiberglass Dustcap
  • 4 Ohm impedance
  • Patented double ferrite magnet system
  • Resonant frequency Fs: 21 Hz
  • Sensitivity: 88dB
  • Quality Qt: 0.31
  • Equivalent volume Vas: 95 l
  • Xmax ± 25mm

Key Features Audison Bit Ten DSP Sound Processor:

  • 5-channel digital signal processor
  • Max. Output level : 4 V
  • Dimensions: 191 x 34 x 130 mm
  • Weight: 0.6 kg
  • DRC control panel included

Key Features Masori 10" bass reflex cabinet 35l:

  • Material MDF 18mm
  • Enclosure volume 35L
  • Speaker size 25cm / 10 inch
  • Max. Installation depth 230mm
  • Hole diameter 232mm
  • Max. Subwoofer outer diameter 272mm
  • Dimensions 495 x 330 x 365mm
  • Fabric colour Black melange

Key Features: Stinger SK4241 25mm² cable set:

  • Cable set for a maximum amplifier power of 1500 watts (RMS) / 150A.
  • Cable cross section: 25 mm² made of 100% copper!
  • Scope of delivery:
    • 5,5m Hyper-Twist 4GA 25mm² OFC power cable (matt red)
    • 0,9m Hyper-Twist 4GA 25mm² OFC ground cable (matt-black)
    • 5,18m 0,82mm² remote power cable (matt-blue)
    • 60A Fuse
    • Fuse holder SPD5101 AGU
    • 25mm² crimp ring terminals, pre-installed
    • 1.5mm² Piston Connector (blue)
    • 25mm² Snap In Protective Fire Sleeve
    • Mounting screws
    • 10x cable ties (17,8cm / 7")

€2.225,79 €2.054,00 SPARE €171,79

inkl. MwSt., zzgl. Versand

1 set
Delivery time: 5-10 days