Our complete sets consist of perfectly matched components that fit together perfectly in terms of both sound and performance to create a harmonious sound image.
The components were assembled so that the amplifiers produce the maximum possible performance with the selected speakers.

The set includes everything you need for complete and safe cabling!
If you do not need individual components, or want to exchange them for others, write us briefly, we will change the offer immediately according to your wishes.
The set includes the following components:
  • 1x DD Audio D5.500 5-channel amplifier
  • 2x Peerless by Tymphany NE65W-04 5cm (2") full range driver
  • 2x Peerless by Tymphany NE180W-08 7" (18cm) bass-midrange driver
  • 1x Peerless by Tymphany XXLS-P835016 25cm subwoofer
  • 1x Masori 2x 10" bass reflex subwoofer enclosure 70l(free of charge)
  • 1x Stinger SK4241 25mm² cable set incl. fuse(free of charge)
  • 1x 25m 2.5mm² speaker cable(free of charge)
What you optional you could use in addition:
  1. RCA cable. Do you have an aftermarket radio or a factory radio? For an aftermarket radio you need the appropriate number of RCA cables, which you can find under our accessories. You need 1 cable per channel. If you have a factory radio, connect the original speaker wires to the high inputs of the power amp, or use a separate Hi-Low converter.
  2. Attenuation. With the increased music power, trim parts can suddenly start to vibrate. This can be done by covering them from the inside with Alubutyl, this is also recommended for the inside of the vehicle sheet metal, which creates an even clearer sound reproduction, without noise.
  3. Additional battery. Depending on the existing vehicle battery, it makes sense from about 600W total power of the amplifier, to install an additional battery. You can find this under our accessories -> batteries. For which amplifier power, the respective battery is useful, is noted in the title of the batteries.
  4. Capacitor (PowerCap). A capacitor compensates for the voltage drops that can occur in the vehicle electrical system during strong bass hits. This is noticeable by an unclean bass reproduction, or slightly dimming lights in the interior. A power cap or an additional battery can help here.
  5. Rear system. The speakers in the rear doors of your car do not have the same power as the front system. Generally it is sufficient to replace only the front system. However, if you want a homogeneous sound from all speakers, we will be happy to create an individual complete set for you.

Key Features DD AudioD5.5005-channel amplifier:

  • 5-channel amplifier in mini design
  • 1Ohm stable
  • Dimensions: 350 x 125 x 55 mm
  • Power @ 4Ω 14,4v 0,1% THD: 4x90 + 1x200 Watt
  • Power @ 2Ω 14,4v 0,1% THD: 4x130 + 1x310 Watt
  • Power @ 1Ω 14,4v 0,1% THD: + 1x500 Watt

Key Features Peerless by Tymphany NE65W-04 5cm (2") full range driver:

  • 2" (5cm) full range driver from Tymphany by Peerless NE series.
  • Power consumption (RMS) 20 watts
  • Power handling (maximum) 40 watts
  • Sensitivity 82.2 dB at 1W/1m
  • Frequency response 150 to 18,000 Hz
  • Voice coil diameter 1"
  • Impedance 4 Ohm
  • Maximum linear excursion (Xmax) +-1.65 mm

Key Features Peerless by Tymphany NE180W-08 7" (18cm) bass-midrange driver:

  • 7" (18cm) bass-midrange driver from Tymphany by Peerless of the NE series
  • Power consumption (RMS) 80 watts
  • Power handling (max) 160 watts
  • Sensitivity 87.4 dB at 2.83V/1m
  • Frequency response 40 to 4,000 Hz
  • Voice coil diameter 1.5".
  • Impedance 8 Ohm
  • Maximum linear excursion (Xmax) +-5 mm

Key Features Masori 2x10" Bass Reflex Subwoofer Enclosure 70l:

  • Material MDF 18mm
  • Enclosure volume 35L + 35L
  • Speaker size 25cm / 10 inch
  • Max. Installation depth 290mm
  • Hole diameter 232mm
  • Max. Subwoofer outer diameter 265mm
  • Dimensions 805 x 390 x 345mm, bass tunnel 70mm/200mm
  • Fabric color Black melange

        Key Features Peerless by Tymphany XXLS-P835016 25cm Subwoofer

        • 10" (25cm) subwoofer from Tymphany by Peerless of the XXLS series
        • Power consumption (RMS) 100 watts
        • Power handling (max) 200 watts
        • Sensitivity 88.98 dB at 2.83V/1m
        • Frequency range 20 to 1,100Hz
        • Voice coil diameter 2".
        • Impedance 4 Ohm
        • Maximum linear excursion (Xmax) +-12.3 mm

        Key Features: Stinger SK4241 25mm² cable set:

        • Cable set for a maximum amplifier power of 1500 watts (RMS) / 150A.
        • Cable cross section: 25 mm² made of 100% copper!
        • Scope of delivery:
          • 5,5m Hyper-Twist 4GA 25mm² OFC power cable (matt red)
          • 0,9m Hyper-Twist 4GA 25mm² OFC ground cable (matt-black)
          • 5.18m 0.82mm² remote power on cable (matte blue)
          • 60A fuse
          • Fuse holder SPD5101 AGU
          • 25 mm² crimp ring terminals, pre-installed
          • 1.5 mm² piston connector (blue)
          • 25 mm² snap in protective fire sleeve
          • Mounting screws
          • 10x cable ties (17,8cm / 7")
                Rated 5/5 based on 28 customer reviews
                Benedikt Golla - by , Feb 07, 2021

                SOUND-PLUS Komplettset DD Audio, Peerless by Tymphany

                Masori SOUND-PLUS complete set DD Audio, Peerless by Tymphany - Sound-Plus - Masori.co.uk
                Masori SOUND-PLUS complete set DD Audio, Peerless by Tymphany - Sound-Plus - Masori.com
                Masori SOUND-PLUS complete set DD Audio, Peerless by Tymphany - Sound-Plus - Masori.com
                Masori SOUND-PLUS complete set DD Audio, Peerless by Tymphany - Sound-Plus - Masori.com
                Masori SOUND-PLUS complete set DD Audio, Peerless by Tymphany - Sound-Plus - Masori.com
                Masori SOUND-PLUS complete set DD Audio, Peerless by Tymphany - Sound-Plus - Masori.co.uk
                Masori SOUND-PLUS complete set DD Audio, Peerless by Tymphany - Sound-Plus - Masori.com
                Masori SOUND-PLUS complete set DD Audio, Peerless by Tymphany - Sound-Plus - Masori.com

                SOUND-PLUS Komplettset DD Audio, Peerless by Tymphany

                ⏱ ANGEBOT

                Masori

                Regular price €1.196,70* €972,00 SPARE €224,70

                inkl. MwSt., zzgl. Shipping

                Our complete sets consist of perfectly matched components that fit together perfectly in terms of both sound and performance to create a harmonious sound image.
                The components were assembled so that the amplifiers produce the maximum possible performance with the selected speakers.

                The set includes everything you need for complete and safe cabling!
                If you do not need individual components, or want to exchange them for others, write us briefly, we will change the offer immediately according to your wishes.
                The set includes the following components:
                • 1x DD Audio D5.500 5-channel amplifier
                • 2x Peerless by Tymphany NE65W-04 5cm (2") full range driver
                • 2x Peerless by Tymphany NE180W-08 7" (18cm) bass-midrange driver
                • 1x Peerless by Tymphany XXLS-P835016 25cm subwoofer
                • 1x Masori 2x 10" bass reflex subwoofer enclosure 70l(free of charge)
                • 1x Stinger SK4241 25mm² cable set incl. fuse(free of charge)
                • 1x 25m 2.5mm² speaker cable(free of charge)
                What you optional you could use in addition:
                1. RCA cable. Do you have an aftermarket radio or a factory radio? For an aftermarket radio you need the appropriate number of RCA cables, which you can find under our accessories. You need 1 cable per channel. If you have a factory radio, connect the original speaker wires to the high inputs of the power amp, or use a separate Hi-Low converter.
                2. Attenuation. With the increased music power, trim parts can suddenly start to vibrate. This can be done by covering them from the inside with Alubutyl, this is also recommended for the inside of the vehicle sheet metal, which creates an even clearer sound reproduction, without noise.
                3. Additional battery. Depending on the existing vehicle battery, it makes sense from about 600W total power of the amplifier, to install an additional battery. You can find this under our accessories -> batteries. For which amplifier power, the respective battery is useful, is noted in the title of the batteries.
                4. Capacitor (PowerCap). A capacitor compensates for the voltage drops that can occur in the vehicle electrical system during strong bass hits. This is noticeable by an unclean bass reproduction, or slightly dimming lights in the interior. A power cap or an additional battery can help here.
                5. Rear system. The speakers in the rear doors of your car do not have the same power as the front system. Generally it is sufficient to replace only the front system. However, if you want a homogeneous sound from all speakers, we will be happy to create an individual complete set for you.

                Key Features DD AudioD5.5005-channel amplifier:

                • 5-channel amplifier in mini design
                • 1Ohm stable
                • Dimensions: 350 x 125 x 55 mm
                • Power @ 4Ω 14,4v 0,1% THD: 4x90 + 1x200 Watt
                • Power @ 2Ω 14,4v 0,1% THD: 4x130 + 1x310 Watt
                • Power @ 1Ω 14,4v 0,1% THD: + 1x500 Watt

                Key Features Peerless by Tymphany NE65W-04 5cm (2") full range driver:

                • 2" (5cm) full range driver from Tymphany by Peerless NE series.
                • Power consumption (RMS) 20 watts
                • Power handling (maximum) 40 watts
                • Sensitivity 82.2 dB at 1W/1m
                • Frequency response 150 to 18,000 Hz
                • Voice coil diameter 1"
                • Impedance 4 Ohm
                • Maximum linear excursion (Xmax) +-1.65 mm

                Key Features Peerless by Tymphany NE180W-08 7" (18cm) bass-midrange driver:

                • 7" (18cm) bass-midrange driver from Tymphany by Peerless of the NE series
                • Power consumption (RMS) 80 watts
                • Power handling (max) 160 watts
                • Sensitivity 87.4 dB at 2.83V/1m
                • Frequency response 40 to 4,000 Hz
                • Voice coil diameter 1.5".
                • Impedance 8 Ohm
                • Maximum linear excursion (Xmax) +-5 mm

                Key Features Masori 2x10" Bass Reflex Subwoofer Enclosure 70l:

                • Material MDF 18mm
                • Enclosure volume 35L + 35L
                • Speaker size 25cm / 10 inch
                • Max. Installation depth 290mm
                • Hole diameter 232mm
                • Max. Subwoofer outer diameter 265mm
                • Dimensions 805 x 390 x 345mm, bass tunnel 70mm/200mm
                • Fabric color Black melange

                      Key Features Peerless by Tymphany XXLS-P835016 25cm Subwoofer

                      • 10" (25cm) subwoofer from Tymphany by Peerless of the XXLS series
                      • Power consumption (RMS) 100 watts
                      • Power handling (max) 200 watts
                      • Sensitivity 88.98 dB at 2.83V/1m
                      • Frequency range 20 to 1,100Hz
                      • Voice coil diameter 2".
                      • Impedance 4 Ohm
                      • Maximum linear excursion (Xmax) +-12.3 mm

                      Key Features: Stinger SK4241 25mm² cable set:

                      • Cable set for a maximum amplifier power of 1500 watts (RMS) / 150A.
                      • Cable cross section: 25 mm² made of 100% copper!
                      • Scope of delivery:
                        • 5,5m Hyper-Twist 4GA 25mm² OFC power cable (matt red)
                        • 0,9m Hyper-Twist 4GA 25mm² OFC ground cable (matt-black)
                        • 5.18m 0.82mm² remote power on cable (matte blue)
                        • 60A fuse
                        • Fuse holder SPD5101 AGU
                        • 25 mm² crimp ring terminals, pre-installed
                        • 1.5 mm² piston connector (blue)
                        • 25 mm² snap in protective fire sleeve
                        • Mounting screws
                        • 10x cable ties (17,8cm / 7")

                              €1.196,70* €972,00 SPARE €224,70

                              inkl. MwSt., zzgl. Shipping

                              1 Set
                              Delivery time: 5-10 days