The B2 Audio RAGE FIEO (Four In Eight Out) DSP:

  • FIEO, is the successor of the previous DSP.
  • The B2 Audio RAGE FIEO is characterized by the fact that he has both an 8-channel RCA output, but also an additional 4 amplified channels with 40 watts each, which are perfect for use on the rear system.
  • The integrated DSP has the ability to control 8-channels, it is up to you whether these 8 channels only the RCA outputsor you want to use 4x Cinch outputsand 4x amplifier outputs. In total you always have 8 processor channels available and you can decide how to configure the RCA outputs and amplifier outputs.

The 4 connections are as follows:

  • Highlevel (signal input directly from speakers with the option to use the built-in amplifier with 4 x 40 w), Lowlevel (RCA signal input with optional output amplification via built-in amplifier), Bluetooth 5.0 and PC connectivity via USB.
  • On the output side there are 8 channels, pre-configured as tweeters from front left to right, midbass & rear linksto right. The remaining 2 channels configured as channel 7 & 8 are full range center & subwoofer. The possibility to run all channels as fullrange, highpass or even bandpass is possible in the software as well as in the app "Tweak N Tune".


Tweak N Tune software:

  • The software offers a 31 band EQ along with 3 different crossover configurations; Butterworth, Linkwitz Riley & Bessel. It is even possible to mix the crossovers, i.e. Buttworth as high pass and Linkwitz as low pass. Slopes of each crossover range from 6 dB ~ 48 dB.
  • Miliseconds, cm or inches are selectable as time delay on all channels. Adjustment can be done by typing or scrolling up or down. Speaker positioning next to the graphical layout of the vehicle simplifies adjustment and gives a better overview of what is being optimized.
  • There is even a "graphics only" selection. In this mode, you can drag the delay to a specific point while adjusting all channels at the same time. This feature is a huge time saver and provides a good starting point for further adjustments.


USB, WIFI and REMOTE CONTROL:

  • Adapters, modules & additional fees are things of the past. The RAGE FiEo offers built-in Wifi connectivity right out of the box. There is even a simplified IR remote for channel selection, volume and track selection.
  • The GUI software can be downloaded, and the "Tweak N Tune" app is offered on Google Play and App store. With these apps, you can make a variety of adjustments via smartphone.

Technical Features RAGE FiEo DSP:

  • Inputs and outputs:
    • Signal Outputs :
      • 8 x RCA outputs
      • 4 x 40W amplifier outputs
    • Signal inputs : 6 x RCA, Hi Level
    • Input : Toslink (optical 12 ~96 KHz, stereo)
    • AUX (3.5 mm jack, stereo)
  • Frequency response : 5 Hz ~ 20 KHz (+/- 3 dB)
  • Signal to noise ratio : > 110 dB
  • Channel separation : >60 dB
  • THD : 0.05%
  • Input sensitivity : 5 ~ 0.3 V
  • Input impedance : 32 bit, 8 channel, 192 KHz
  • Equalizer type: Parametric / Graphic
  • Q 0.5 ~9
  • Equalizer bands : 6 x 31 / 2 x 11
  • -18 ~ 12 dB
  • Crossover type : Butterworth, Linkwitz Riley, Bessel
  • Crossover slope: 0 ~ 48 dB / Oct HP / BP / LP
  • Operating voltage : 9.8 V ~ 16 V
  • Remote control features: master volume, subwoofer volume, input selection, mode selection

Dimensions:

  • Length 170mm
  • Width 112mm
  • Height 45mm
Rated 5/5 based on 28 customer reviews
Benedikt Golla - by , Feb 07, 2021

RAGE FiEo

B2 Audio RAGE FiEo - DSP - Masori.com
B2 Audio RAGE FiEo - DSP - Masori.com
B2 Audio RAGE FiEo - DSP - Masori.com
B2 Audio RAGE FiEo - DSP - Masori.com
B2 Audio RAGE FiEo - DSP - Masori.com
B2 Audio RAGE FiEo - DSP - Masori.com

RAGE FiEo

B2 Audio

Regular price * €295,00

inkl. MwSt., zzgl. Shipping

The B2 Audio RAGE FIEO (Four In Eight Out) DSP:

  • FIEO, is the successor of the previous DSP.
  • The B2 Audio RAGE FIEO is characterized by the fact that he has both an 8-channel RCA output, but also an additional 4 amplified channels with 40 watts each, which are perfect for use on the rear system.
  • The integrated DSP has the ability to control 8-channels, it is up to you whether these 8 channels only the RCA outputsor you want to use 4x Cinch outputsand 4x amplifier outputs. In total you always have 8 processor channels available and you can decide how to configure the RCA outputs and amplifier outputs.

The 4 connections are as follows:

  • Highlevel (signal input directly from speakers with the option to use the built-in amplifier with 4 x 40 w), Lowlevel (RCA signal input with optional output amplification via built-in amplifier), Bluetooth 5.0 and PC connectivity via USB.
  • On the output side there are 8 channels, pre-configured as tweeters from front left to right, midbass & rear linksto right. The remaining 2 channels configured as channel 7 & 8 are full range center & subwoofer. The possibility to run all channels as fullrange, highpass or even bandpass is possible in the software as well as in the app "Tweak N Tune".


Tweak N Tune software:

  • The software offers a 31 band EQ along with 3 different crossover configurations; Butterworth, Linkwitz Riley & Bessel. It is even possible to mix the crossovers, i.e. Buttworth as high pass and Linkwitz as low pass. Slopes of each crossover range from 6 dB ~ 48 dB.
  • Miliseconds, cm or inches are selectable as time delay on all channels. Adjustment can be done by typing or scrolling up or down. Speaker positioning next to the graphical layout of the vehicle simplifies adjustment and gives a better overview of what is being optimized.
  • There is even a "graphics only" selection. In this mode, you can drag the delay to a specific point while adjusting all channels at the same time. This feature is a huge time saver and provides a good starting point for further adjustments.


USB, WIFI and REMOTE CONTROL:

  • Adapters, modules & additional fees are things of the past. The RAGE FiEo offers built-in Wifi connectivity right out of the box. There is even a simplified IR remote for channel selection, volume and track selection.
  • The GUI software can be downloaded, and the "Tweak N Tune" app is offered on Google Play and App store. With these apps, you can make a variety of adjustments via smartphone.

Technical Features RAGE FiEo DSP:

  • Inputs and outputs:
    • Signal Outputs :
      • 8 x RCA outputs
      • 4 x 40W amplifier outputs
    • Signal inputs : 6 x RCA, Hi Level
    • Input : Toslink (optical 12 ~96 KHz, stereo)
    • AUX (3.5 mm jack, stereo)
  • Frequency response : 5 Hz ~ 20 KHz (+/- 3 dB)
  • Signal to noise ratio : > 110 dB
  • Channel separation : >60 dB
  • THD : 0.05%
  • Input sensitivity : 5 ~ 0.3 V
  • Input impedance : 32 bit, 8 channel, 192 KHz
  • Equalizer type: Parametric / Graphic
  • Q 0.5 ~9
  • Equalizer bands : 6 x 31 / 2 x 11
  • -18 ~ 12 dB
  • Crossover type : Butterworth, Linkwitz Riley, Bessel
  • Crossover slope: 0 ~ 48 dB / Oct HP / BP / LP
  • Operating voltage : 9.8 V ~ 16 V
  • Remote control features: master volume, subwoofer volume, input selection, mode selection

Dimensions:

  • Length 170mm
  • Width 112mm
  • Height 45mm

Regular price * €295,00

inkl. MwSt., zzgl. Shipping

1 Piece
5% discount for: Prepayment, Paypal
Delivery time: 4-8 weeks