Art:

• MX 600W 3-channel system amplifier in Class D

Features:

• 3-channel system amplifier in Class D, 100 W x 2 + 400 W x 1 @ 2 Ω / 75 W x 2 + 250 W x 1 @ 4 Ω - 14.4V.
  
• The MX600/3 3-channel amplifier uses JL's high-speed NexD™ switching design to deliver plenty of clean power without stressing load systems.
• Its tiny, cast aluminum housing is highly corrosion resistant and IPX7 waterproof.
  
• Rated at 75W x 2 into 4 ohms, plus 400 watts for a subwoofer system, the MX600/3 is a great all-in-one solution for running a complete audio system from a single, ultra-compact chassis.
  
• Integrated filters include a 12 dB/octave high-pass crossover for the main channels and a dedicated 24 dB/octave low-pass crossover for the subwoofer channel.
• Other features include a bass boost EQ, a variable infrasonic filter, and a polarity switch for the subwoofer output.
• A dual-range input section accepts a variety of input voltage levels, from line level to high power speaker level signals.
  
• This amplifier features a rugged powder-coated finish, a sealed cover for the controls, and stainless steel hardware for durability.

Rated continuous power (RMS) at 14.4 V:

• Main channels @ 4 Ω : 75 W RMS x 2
  
• Main channels @ 2 Ω : 100 W RMS x 2
• Main channels - bridged @ 4Ω :200 W RMS x 1
  
• Subwoofer channel @ 4 Ω : 250 W RMS x 1
  
• Subwoofer channel @ 3 Ω : 300 W RMS x 1
  
• Subwoofer channel @ 2 Ω : 400 W RMS x 1
  
• Subwoofer channel @ 1.5 Ω : N/A

Rated continuous power (RMS) at 12.5 V:

• Main channels @ 4 Ω : 50 W RMS x 2
  
• Main channels @ 2 Ω : 80 W RMS x 2
  
• Main channels - bridged @ 4Ω : 100 W RMS x 1
  
• Subwoofer channel @ 4 Ω : 200 W RMS x 1
  
• Subwoofer channel @ 3 Ω : 250 W RMS x 1
  
• Subwoofer channel @ 2 Ω : 300 W RMS x 1
  
• Subwoofer channel @ 1.5 Ω : N/A

General Specifications:

• Frequency response : 20 Hz - 20 kHz (+0, -1dB)
  
• S/N ratio, referenced to highest rated power : >88 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth).
• Attenuation factor @ 4 Ω : >92 / 50 Hz
  
• Attenuation factor @ 2 Ω : >43 / 50 Hz
  
• THD+N @ nominal power (main channels) : <1% @ 2 Ω per Ch.
  
• THD+N @ nominal power (subwoofer channels) :<1% @ 2 Ω per Ch.
  
• Input voltage range @ RCA inputs : switchable from 250 mV - 4 V RMS (low) to 580 mV - 14 V RMS (high).
  
• Minimum cable diameter : 25mm²
  
• Fuse rating : 60A (AFS, AGU or MaxiFuse™)

Signal processing:

• Filter slope : 12 dB/octave
  
• Filter frequency range : Channels 1 & 2 (front) 35 Hz - 300 Hz
  
• Filter frequency range : Subwoofer channel : 40 Hz - 400 Hz
  
• Filter mode : Channels 1 & 2 (front) : high pass only
  
• Filter mode: Subwoofer channel : Low pass only
  
• Calibrated filter freq. potentiometer :Yes
  
• Filter defeat function : Yes
  
• Subwoofer level control remote control : Optional (RBC-1)
• Channel input mode switch : Yes (2/4 channel)
  
• Pass-through preamp output : None

Physical Specifications:

• Height (H) : 1.77 inch / 45 mm
  
• Width (W) : 237 mm (9.33 inch)
  
• Depth (D) : 115 mm (4.50 inch)