JL Audio CL-RLC

Description

Discover the CL-RLC, a universal bass remote control for line level signals from JL Audio. Equipped with fully active 2-channel. Remote control/line driver and pass-through outputs, this remote control is a true active preamplifier with active level control. The CL-RLC features differential balanced inputs that minimize the chance of noise and deliver up to 7.5 VRMS of uncapped output power to your amplifier. It also impresses with its ability to control your subwoofer levels and pass signals to a satellite amplifier. The application of the CL-RLC is not limited to subwoofer operation, but can be used anywhere you need volume control for a line level signal.

Features

• Fully active, 2-channel. Remote control / line driver with through outputs
  
• The CL-RLC is a genuine, active preamplifier with active level control that can be used as a subwoofer level control or as an audiophile full-range volume control.
• The CL-RLC's differential-balanced inputs minimize the likelihood of noise, while its very healthy preamp design delivers up to 7.5 VRMS of uncapped output power to your amplifier.
• Unlike cheap, passive line level controls, no signal passes through the CL-RLC's control cable and knob. Instead, the control knob sends only volume level signals to the preamp circuitry to maximize fidelity and minimize the possibility of noise.
  
• Subwoofer level: If you connect the CL-RLC in series with any signal that feeds a subwoofer amplifier, you can control the subwoofer level from the front of the vehicle using the control provided.
• Another important feature is a buffered pass-through connection, so that you can also pass signals (without volume control) from the same input channels to a satellite amplifier.
  
• Full-range volume control: As the CL-RLC uses a high-quality active circuit, its application is not limited to subwoofer operation. It can be used whenever and wherever you need a volume control for a line level signal. 

General specifications

• Channel separation : >80 dB
  
• Output impedance : 475 Ω
  
• Amplification range : 7.5 V RMS
  
• Max. Unshortened output : 7.5 V RMS
  
• Frequency response : 10 Hz - 30 kHz (+0/-1 dB)
  
• THD+N @ nominal output : less than 0.05% at 7.5 V RMS
  
• S/N ratio : >117 dB at 7.5 V RMS
  
• Max. Input level : 4 V RMS
  
• Operating current consumption : 90 mA

Dimensions

• Width (W): 100 mm / 3.94 inches
  
• Height (H) : 1.21 inch / 31 mm
  
• Depth (D) : 1.63 inch / 41 mm
  
• Net weight : 0,55 lb / 0,25 kg