SB Acoustics Satori MR13PNW / Paper
5" (13cm) midrange driver
still
/piece
VAT included. Excl. VAT incl. shipping costs excl. shipping costs
You save 5% on this item by choosing the payment method prepayment during the order process (bank transfer) during the order process The discount will be deducted automatically!
Seen cheaper?
"We keep up - guaranteed!" Take advantage of the low price guarantee! If you find an item cheaper on a website within the EU, we will match the competitor's price and add an item from our range of accessories.
Your advantages with Masori
Advice from Carhifi experts
Advice from Carhifi experts
Seen this item cheaper elsewhere? Write us an email at [email protected] and you will get the same price, plus a free accessory and benefit from Masori Lifetime Support! Warranty conditions.
Description
Der SB Acoustics SATORI MR13PNW 5" (13cm) Mitteltöner mit Paper/Papyrus Membran ist in einer 4 Ohm und 8 Ohm Variante verfügbar. Die Ultraleichte Membran wird von einem kräftigen Neodymantrieb angetrieben. Die Resonanzfrequenz um 40 Hz liegt weit außerhalb des Nutzbereiches, wodurch der Treiber im Nutzbereich äußerst linear spielt.
Features :
- Ventilated, aerodynamic cast aluminum chassis for optimum strength and low compression
- Proprietäres Konusmaterial mit EGYPTIAN PAPYRUS-Fasern aus eigener Herstellung
- Soft rubber surround with low damping for optimum transient response
- Advanced BIMAX spider for improved linearity
- Powerful, optimized neodymium motor system with low distortion
- Non-conductive glass fiber voice coil former for minimal attenuation
- Extended copper sleeve on the pole piece for low inductance and reduced distortion
- CCAW voice coil for reduced moving mass
- Durable silver wires with 180° spacing for improved stability
- Ventilated pole piece and coil carrier for reduced compression
- Low ratio of piston to chassis diameter
- Protrusions in the seal and in the screw holes for reduced coupling to the speaker housing
Data 4 Ohm variant
- Nominal impedance 4 Ω
- Frequenzbereich: 60Hz - 4kHz
- Gleichstromwiderstand, Re 3,3 Ω
- Inductance of the voice coil, Le 0.11 mH
- Effective diaphragm area, Sd 70 cm2
- Durchmesser der Schwingspule 30,5 mm
- Höhe der Schwingspule 11 mm
- Height of the air gap 5 mm
- Linearer Spulenhub (p-p) 6 mm
- Magnetic flux density 1.08 T
- Weight of the magnet 0.1 kg
- Net weight 0.78 kg
- Free air resonance, Fs 41 Hz
- Empfindlichkeit (2,83 V / 1 m) 91 dB
- Mechanischer Q-Faktor, Qms 2,8
- Elektrischer Q-Faktor, Qes 0,25
- Gesamt-Q-Faktor, Qts 0,23
- Bewegte Masse inkl. Luft, Mms 5,4 g
- Kraftfaktor, Bl 4,3 Tm
- Äquivalenzvolumen, VAS 19,4 Liter
- Nachgiebigkeit, Cms 2,79 mm/N
- Mechanical loss, Rms 0.5 kg/s
- Rated load capacity* 30 W
- * IEC 268-5, high-pass Butterworth, 200 Hz, 12 dB/oct.
Data 8 Ohm variant
- Nominal impedance 8 Ω
- Frequenzbereich: 60Hz - 4kHz
- Gleichstromwiderstand, Re 6,8 Ω
- Inductance of the voice coil, Le 0.11 mH
- Effective diaphragm area, Sd 70 cm2
- Voice coil diameter 30.5 mm
- Höhe der Schwingspule 11 mm
- Height of the air gap 5 mm
- Linearer Spulenhub (p-p) 6 mm
- Magnetic flux density 1.08 T
- Weight of the magnet 0.1 kg
- Net weight 0.78 kg
- Freie Luftresonanz, Fs 47 Hz
- Sensitivity (2.83 V / 1 m) 88 dB
- Mechanischer Q-Faktor, Qms 4,58
- Electrical Q-factor, Qes 0.32
- Total Q-factor, Qts 0.3
- Bewegte Masse inkl. Luft, Mms 6,2 g
- Force factor, Bl 6.2 Tm
- Äquivalenzvolumen, VAS 12,9 Liter
- Nachgiebigkeit, Cms 1,85 mm/N
- Mechanical loss, Rms 0.4 kg/s
- Rated load capacity* 30 W
- * IEC 268-5, high-pass Butterworth, 200 Hz, 12 dB/oct.
Dimensions